Connecting a server with real IP with a viewer behind a NAT

[jlpforge]

I'd like to connect my computer (viewer) behind a NAT with another computer (server) with real IP.

How can I configura pchelpware to do this?

[arc]

Server setup:
The pchelpware server needs to be set to connect to the Public IP address of the router behind which the viewer is located

Viewer Setup:
In order for the viewer to recieve the connection initiated by server you need to either

1) Forward the port used to the private ip address of the PC behind the NAT Router and ensure the PC firewall is correclty configured aswell.

2) Set the desired viewer PC as a DMZ host in the router and ensure the PC firewall is correclty configured aswell.

Before doing either you need to be comfortable reconfiguring routers and firewalls and can appreciate how such changes will effect security on a local and network level.
Specific configuration on routers and fiewalls will depend on the routers and firewalls used.
Elsewhere on this site and on many others a wealth of information can be found and has been posted in relation to carrying out the above tasks and is easily seachable.

[vpdd]

I quote from http://www.uvnc.com/pchelpware/ :

"No router/modem/firewall configuration is needed to access a remote PC even when it's standing on a protected network behind a NAT
If your PC is also behind Firewall/NAT routers, PCHelpware has the solution that makes everything simple anyway
Using the provided Repeater service, no router configuration is needed at all "

Now, "
I'd like to connect my computer (viewer) behind a NAT with another computer (server) with real IP. " How can be this done w/o modification or router o NAT?

Thanks