Hello folks,
I'm remotely connecting through VNC to two machines, each running Red Hat 5.9, from mine which is running Windows 7. Both connections were working well before. However, now one of the machines only gives me a black screen, with a pop up that says:
"There was an error starting GNOME Settings Daemon. Some things, such as themes, sounds, or background settings may not work correctly. The last error message was: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken."
I've searched all over the net for a solution to no avail. One thing I tried was deleting the following files in hopes of resetting my gnome environment but this did not help either.
Files: /tmp/orbit-<user>, .gconf, .gconfd, .gnome, .gnome2 and .metacity.
Below you'll find two vncviewer log files, one from the connection that still works well and the other from the one that gives me the above errors, named good and bad respectively.
I'm new to the forum so I apologize if this is not the most adequate forum section for my problem or if I omitted any relevant files or debug information. I would greatly appreciate any help you can send my way.
Miguel.
good:
_XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6
_XSERVTransOpen: transport open failed for inet6/mtlsim2:17
_XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6
_XSERVTransmkdir: Owner of /tmp/.X11-unix should be set to root
Xvnc Free Edition 4.1.2
Copyright (C) 2002-2005 RealVNC Ltd.
See http://www.realvnc.com for information on VNC.
Underlying X server release 70101000, The X.Org Foundation
Tue Jul 16 11:46:00 2013
vncext: VNC extension running!
vncext: Listening for VNC connections on port 5917
vncext: Listening for HTTP connections on port 5817
vncext: created VNC server for screen 0
localuser:<user> being added to access control list
No profile for user '<user>' found
SESSION_MANAGER=local/mtlsim2:/tmp/.ICE-unix/28358
Window manager warning: Log level 32: could not find XKB extension.
Getting adapter list failed: The name org.bluez was not provided by any .service files
Passkey agent registration failed: The name org.bluez was not provided by any .service files
** (nm-applet:28450): WARNING **: <WARN> applet_dbus_manager_start_service(): Could not acquire the NetworkManagerUserSettings service.
Message: 'Connection ":1.752" is not allowed to own the service "org.freedesktop.NetworkManagerUserSettings" due to security policies in the configuration file'
Initializing nautilus-open-terminal extension
Unable to open desktop file /usr/share/applications/redhat-email.desktop for panel launcher: No such file or directory
Unable to open desktop file /usr/share/applications/openoffice.org-1.9-impress.desktop for panel launcher: No such file or directory
Introspect error: Launch helper exited with unknown return code 0
Introspect error: A security policy in place prevents this sender from sending this message to this recipient, see message bus configuration file (rejected message had interface "org.freedesktop.DBus.Introspectable" member "Introspect" error name "(unset)" destination "edu.duke.linux.yum")
Traceback (most recent call last):
File "/usr/bin/puplet", line 467, in ?
main()
File "/usr/bin/puplet", line 464, in main
p.run()
File "/usr/bin/puplet", line 451, in run
self._refreshInfo()
File "/usr/bin/puplet", line 191, in _refreshInfo
if self.updatesObject is not None and \
AttributeError: DBusException instance has no attribute '_dbus_error_name'
could not attach to desktop process
bad:
_XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6
_XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6
_XSERVTransOpen: transport open failed for inet6/mtlcad2:29
_XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6
_XSERVTransmkdir: Owner of /tmp/.X11-unix should be set to root
Xvnc Free Edition 4.1.2
Copyright (C) 2002-2005 RealVNC Ltd.
See http://www.realvnc.com for information on VNC.
Underlying X server release 70101000, The X.Org Foundation
Tue Jul 16 11:45:40 2013
vncext: VNC extension running!
vncext: Listening for VNC connections on port 5929
vncext: Listening for HTTP connections on port 5829
vncext: created VNC server for screen 0
localuser:<user> being added to access control list
No profile for user '<user>' found
Launching a SCIM process with x11...
Loading socket Config module ...
GConf Error: Adding client to server's list failed, CORBA error: IDL:omg.org/CORBA/COMM_FAILURE:1.0
Creating backend ...
GConf Error: Adding client to server's list failed, CORBA error: IDL:omg.org/CORBA/COMM_FAILURE:1.0
Loading x11 FrontEnd module ...
GTK Panel of SCIM 1.4.4
Starting SCIM as daemon ...
SCIM has been successfully launched.
Smart Common Input Method 1.4.4
SESSION_MANAGER=local/mtlcad2:/tmp/.ICE-unix/10446
Failed to get value for `/apps/gnome-session/rh/window_manager': Adding client to server's list failed, CORBA error: IDL:omg.org/CORBA/COMM_FAILURE:1.0
Window manager warning: Adding client to server's list failed, CORBA error: IDL:omg.org/CORBA/COMM_FAILURE:1.0
Window manager warning: Adding client to server's list failed, CORBA error: IDL:omg.org/CORBA/COMM_FAILURE:1.0
Window manager warning: Adding client to server's list failed, CORBA error: IDL:omg.org/CORBA/COMM_FAILURE:1.0
Window manager warning: Adding client to server's list failed, CORBA error: IDL:omg.org/CORBA/COMM_FAILURE:1.0
GConf Error: Adding client to server's list failed, CORBA error: IDL:omg.org/CORBA/COMM_FAILURE:1.0
GConf Error: Adding client to server's list failed, CORBA error: IDL:omg.org/CORBA/COMM_FAILURE:1.0
GConf Error: Adding client to server's list failed, CORBA error: IDL:omg.org/CORBA/COMM_FAILURE:1.0
GConf Error: Adding client to server's list failed, CORBA error: IDL:omg.org/CORBA/COMM_FAILURE:1.0
Window manager warning: Adding client to server's list failed, CORBA error: IDL:omg.org/CORBA/COMM_FAILURE:1.0
Window manager warning: Adding client to server's list failed, CORBA error: IDL:omg.org/CORBA/COMM_FAILURE:1.0
GConf Error: Adding client to server's list failed, CORBA error: IDL:omg.org/CORBA/COMM_FAILURE:1.0
Window manager warning: Adding client to server's list failed, CORBA error: IDL:omg.org/CORBA/COMM_FAILURE:1.0
GConf Error: Adding client to server's list failed, CORBA error: IDL:omg.org/CORBA/COMM_FAILURE:1.0
GConf Error: Adding client to server's list failed, CORBA error: IDL:omg.org/CORBA/COMM_FAILURE:1.0
Window manager warning: Adding client to server's list failed, CORBA error: IDL:omg.org/CORBA/COMM_FAILURE:1.0
GConf Error: Adding client to server's list failed, CORBA error: IDL:omg.org/CORBA/COMM_FAILURE:1.0
GConf Error: Adding client to server's list failed, CORBA error: IDL:omg.org/CORBA/COMM_FAILURE:1.0
Window manager warning: 0 stored in GConf key /apps/metacity/general/num_workspaces is not a reasonable number of workspaces, current maximum is 36
Window manager warning: Adding client to server's list failed, CORBA error: IDL:omg.org/CORBA/COMM_FAILURE:1.0
Window manager warning: Adding client to server's list failed, CORBA error: IDL:omg.org/CORBA/COMM_FAILURE:1.0
Window manager warning: Adding client to server's list failed, CORBA error: IDL:omg.org/CORBA/COMM_FAILURE:1.0
GConf Error: Adding client to server's list failed, CORBA error: IDL:omg.org/CORBA/COMM_FAILURE:1.0
Window manager warning: Adding client to server's list failed, CORBA error: IDL:omg.org/CORBA/COMM_FAILURE:1.0
Window manager warning: Adding client to server's list failed, CORBA error: IDL:omg.org/CORBA/COMM_FAILURE:1.0
Window manager warning: Adding client to server's list failed, CORBA error: IDL:omg.org/CORBA/COMM_FAILURE:1.0
GConf Error: Adding client to server's list failed, CORBA error: IDL:omg.org/CORBA/COMM_FAILURE:1.0
Window manager warning: Adding client to server's list failed, CORBA error: IDL:omg.org/CORBA/COMM_FAILURE:1.0
GConf Error: Adding client to server's list failed, CORBA error: IDL:omg.org/CORBA/COMM_FAILURE:1.0
Window manager warning: Adding client to server's list failed, CORBA error: IDL:omg.org/CORBA/COMM_FAILURE:1.0
GConf Error: Adding client to server's list failed, CORBA error: IDL:omg.org/CORBA/COMM_FAILURE:1.0
GConf Error: Adding client to server's list failed, CORBA error: IDL:omg.org/CORBA/COMM_FAILURE:1.0
Window manager warning: 0 stored in GConf key /desktop/gnome/peripherals/mouse/cursor_size is not a reasonable cursor_size; must be in the range 1..128
GConf Error: Adding client to server's list failed, CORBA error: IDL:omg.org/CORBA/COMM_FAILURE:1.0
GConf Error: Adding client to server's list failed, CORBA error: IDL:omg.org/CORBA/COMM_FAILURE:1.0
GConf Error: Adding client to server's list failed, CORBA error: IDL:omg.org/CORBA/COMM_FAILURE:1.0
GConf Error: Adding client to server's list failed, CORBA error: IDL:omg.org/CORBA/COMM_FAILURE:1.0
GConf Error: Adding client to server's list failed, CORBA error: IDL:omg.org/CORBA/COMM_FAILURE:1.0
GConf Error: Adding client to server's list failed, CORBA error: IDL:omg.org/CORBA/COMM_FAILURE:1.0
GConf Error: Adding client to server's list failed, CORBA error: IDL:omg.org/CORBA/COMM_FAILURE:1.0
GConf Error: Adding client to server's list failed, CORBA error: IDL:omg.org/CORBA/COMM_FAILURE:1.0
GConf Error: Adding client to server's list failed, CORBA error: IDL:omg.org/CORBA/COMM_FAILURE:1.0
GConf Error: Adding client to server's list failed, CORBA error: IDL:omg.org/CORBA/COMM_FAILURE:1.0
GConf Error: Adding client to server's list failed, CORBA error: IDL:omg.org/CORBA/COMM_FAILURE:1.0
GConf Error: Adding client to server's list failed, CORBA error: IDL:omg.org/CORBA/COMM_FAILURE:1.0
GConf Error: Adding client to server's list failed, CORBA error: IDL:omg.org/CORBA/COMM_FAILURE:1.0
GConf Error: Adding client to server's list failed, CORBA error: IDL:omg.org/CORBA/COMM_FAILURE:1.0
GConf Error: Adding client to server's list failed, CORBA error: IDL:omg.org/CORBA/COMM_FAILURE:1.0
GConf Error: Adding client to server's list failed, CORBA error: IDL:omg.org/CORBA/COMM_FAILURE:1.0
GConf Error: Adding client to server's list failed, CORBA error: IDL:omg.org/CORBA/COMM_FAILURE:1.0
GConf Error: Adding client to server's list failed, CORBA error: IDL:omg.org/CORBA/COMM_FAILURE:1.0
GConf Error: Adding client to server's list failed, CORBA error: IDL:omg.org/CORBA/COMM_FAILURE:1.0
Update: UltraVNC 1.4.3.6 and UltraVNC SC 1.4.3.6: https://forum.uvnc.com/viewtopic.php?t=37885
Important: Please update to latest version before to create a reply, a topic or an issue: https://forum.uvnc.com/viewtopic.php?t=37864
Join us on social networks and share our announcements:
- Website: https://uvnc.com/
- GitHub: https://github.com/ultravnc
- Mastodon: https://mastodon.social/@ultravnc
- Facebook: https://www.facebook.com/ultravnc1
- X/Twitter: https://x.com/ultravnc1
- Reddit community: https://www.reddit.com/r/ultravnc
- OpenHub: https://openhub.net/p/ultravnc
Important: Please update to latest version before to create a reply, a topic or an issue: https://forum.uvnc.com/viewtopic.php?t=37864
Join us on social networks and share our announcements:
- Website: https://uvnc.com/
- GitHub: https://github.com/ultravnc
- Mastodon: https://mastodon.social/@ultravnc
- Facebook: https://www.facebook.com/ultravnc1
- X/Twitter: https://x.com/ultravnc1
- Reddit community: https://www.reddit.com/r/ultravnc
- OpenHub: https://openhub.net/p/ultravnc