Ultra VNC Repeater / Firewall NAT

[srogers]

Ultravnc Repeater v1.0.2 / Ultravnc Viewer v1.0.0 RC18
I thought I would share my Ultravnc Repeater config. It is working very well. I only open 1 port(6000) on the firewall for 1 routable address. I run CheckpointFW and I have opened port 6000 for ip 189.a.b.c.

RemoteIP ---> Firewall ---> InternalRoutable --> InternalIP

RemoteIP = some telus ip address(157.c.d.e)
Firewall = allow port 6000
InternalRoutable = routable ip address(189.a.b.c)
InternalIP = nonroutable ip address(192.f.g.h)

Ultravnc Repeater Settings
Accept 6000
Listen Enable Unchecked
Allow Connection to Server Checked
Refuse Connection to Server Unchecked
Restrict Access to Server Port 5900
Enter all Internal Non-Routable IP's you want the RemoteIP to connect to. Put a space between each ip address. Click save and restart Ultravnc Repeater.

Ultravnc Viewer Settings
VNC Server InternalIP
Auto Checked
Proxy/Repeater Checked with InternalRoutable:6000


Shayne

[Rudi De Vos]

Previous message edited

Don't know if you where using real adresses...
replaced last part by a.b.c

Thanks for the feedback