SC Service to autostart the SC winvnc.exe

[vnctom]

SC Service V1.0.1
to autostart the SC winvnc.exe
(also if the user is not loged in)

Download:
sourceforge project sctools
SCHost-1.0.1-SC-Winvnc-20.3-install.exe
SCViewer-1.0.1-SC-vncviewer_ssl-1.1.0.0-install.exe
http://sourceforge.net/project/showfile ... _id=170965

1. function description

- The SCViewer & the VNCViewer_ssl.exe initiate the remote connection
by uploading a file with the id-name i.g. 12345 to the << FTP- FOLDER >>
and adding a Viewer to list at the << REPEATER_SSL >> i.g. 12345.

- The SCHost & SCService check the FTP- FOLDER,
if the right id i.g. 12345 appears, then the id-ftp- file will delete,
the SC winvnc.exe will start and the connection will astablish.

2. installation

- Create an FTP- account with fileread, filecreate and filedelete rights
within the ftp- folder (check it out!)

- Setup or use a repeater_ssl server

- install the SCHost-SCService Program on the remote computer
enter the FTP- Server address, the repeate_ssl address and the ftp- account
define and enter the ID i.g. 12345

STRONGLY RECOMMENDED: REBOOT MANUALLY THE SYSTEM, IF SC WINVNC.EXE WONT WORK!!!

- install the SCViewer Program on the local computer
enter the SCHost Id within the SCViewer Shortcut i.g. 12345
use parameters ...\SCViewer.exe 12345 [/s] [other vncviewer parameters]
/s for admin access

enjoy,
vnctom

[vnctom]

scenario web- repeater_ssl- server on local site

1. the web- repeater_ssl- server
a) xampp (Apache, MySQL, PHP, Perl and Ftp server)
download
http://www.apachefriends.org/xampp.html
A couple of mouseclicks and you get it. Install Ftp server as Service.
The problem is https that uses the port 443.

Edit the xampp/apache/conf/extra/httpd-ssl.conf file
change it to use port 4433 as ssl-port for apache:

...
Listen 4433
...
<VirtualHost _default_:4433>
...

reboot the web- server

b) create an ftp-account with fileread, filewrite
and filedelete rights within a ftp- folder

c) repeater_ssl
download
http://www.uvnc.com/pchelpware/downloadsc/index.html
extract the repeater_ssl.exe and the CERTIFICATE.PEM
into one path

create a new CERTIFICATE.PEM
[topic=7834][/topic]

install the repeater_ssl as service
start the command prompt and type
path\repeater_ssl -install enter
net start UltraVNC_Repeater enter

d) behind a router
forwarding the ports 443 for repeater_ssl and 21 for ftp- server
(also 80 for http and 4433 for https).

e) behind a firewall
create rules to gain internet access to the lan ports 443 and 21 (also 80 and 4433).

f) the repeater_ssl and the ftp- server should reachable from internet
thats why you must create an dynamic DNS provider account and an internet address
i.g.
xxxxx.yyyyyy.org
use software to update the dynDNS IP- address or
a function within the router

2. install the SC Service on remote site
the admin may install this Service behind firewalls, routers and proxy- servers
use the internet address xxxxx.yyyyyy.org

3. install the SC viewer program with vncviewer_ssl on local site
behind firewalls, routers and proxy- servers
use the internet address xxxxx.yyyyyy.org

The SC Viewer initiate the connection.
Furthermore the SC Service may start the SC Winvnc.exe at Win Logon Window.

Vnctom