SC or PChelpware for this situation?ADSL/router

[dado023]

hi all

here is the situation i am dealing with:

me@home: behind Elcon ADSLmodem(router/firewall) with dynamic IP adress(changes every 24h) 1000down/256up connected with my lan card

my brother@work: internet center(not so secured) is also behind Dlink ADSLmodem(router/firewall) 5000down/512up with dynamic IP, conected to main asus lan hub and his PC is also in that LAN.

short story:

myPC>ADSLmodem(/router/nat/firewall)(dynamicIP)>>>ISP<<<ADSLmodem(router/nat/firewall)(dynamicIP)>hisPC

i need a solution to work without portforwarding because he cant do portforward because Adslmodem in internet center is password protected

i was reading the forum and i see SC cant beat pchelpware if portforward is the obstacle, but i am not sure. I need you to give me the straight answer SC or pchelpware is better in this situation.
dont nuke or flame me because i know this is a noobish question

Thanks in advance

[kaldag]

The only port forwarding that need to be done will be on your end if your brother starts the connection with PCHElpware or VNC SC. Since your IP changes so often I would aslo subscribe to DYNDNS.com which will enable you to have a DNS address that will not change.

The repeater is also a option.

Ken

[dado023]

The only port forwarding that need to be done will be on your end if your brother starts the connection with PCHElpware or VNC SC. Since your IP changes so often I would aslo subscribe to DYNDNS.com which will enable you to have a DNS address that will not change.

The repeater is also a option.

Ken

okay,
so if i want to use pchelpware without portforward and DYNDNS.com i must use repeater?...correct? ,
Is there another way to avoid portforward and dyndns.com.
Can i use uvnc.com as repeater for this purpose.

Now i am a bit confused, is there any difference in functions between SC and PChelpware except different core and compatibility gap pchelpware Vs SC.?

Huh, i know, there is lots of questions.........
I have searched the forum but i am not still sure in those things.
Please shed some light on my ignorance


Thanks

[kaldag]

Who is going to make the request for connection? By your post it looks like your brother. You will need to port forward on your end. If you don't us DYNDNS you will need to change your connection file each time your ISP changes your IP.


Ken

[dado023]

Who is going to make the request for connection? By your post it looks like your brother. You will need to port forward on your end. If you don't us DYNDNS you will need to change your connection file each time your ISP changes your IP.


Ken

1) which is better for 56k modem, SC or pchelpware?

well, he is going to request for connection......

2) so if i don't want to use use port forward i must go via repeater, correct???

3)and if correct, why should i use pchelpware instead of SC, what is the difference in this scenario
please have patience with me

thanks again,

[redge]

1) SC (better without security)

2) correct

3) SC (better without security)

or

1) pchelpware (secure native without lost hair how to secure)

2) correct

3) pchelpware (secure native without lost hair how to secure)