Repeater with SC

[M.e.M.O.]

Hello .

I've been searching the forums for a while but couln't find decent information about this subject. It seems like the posts are from developers, or ultra-experienced users who can change the code and modify anything they want.

I've been using VNC related programs for a quite while, and needed a replacement of teamviewer since the licences are war too high, and I had a SC build from here. Its working quite nice , except a couple of minor problems, and I feel like they won't be so much of a shizzle.

The problem is with linux repeater. My whole search took more than a couple of hours here and i wasn't able to find any step-by-step guide for a repeater. Neither some info about that ID system. There maybe some, but it can be my fault (stupidity) too .

Simply, I need info about the linux repeater which is going to work outside of our LAN.

Customers (NAT/firewall) ---> Linux repeater (on net ) <---- (NAT/Firewall) Support People (simultaneous connections)

This is how it is going to work. So i won't have to do a lot of settings on our NAT, neither on our customers'. And how does that ID system work?

Thansk in advance.

[YY]

I am not familiar with linux, but there is a "Repeater Step by Step Version 5 With a Linux Section" document available at [topic=5890]Ultra VNC Step by Step Documents in document and PDF Format[/topic] page.

See if the instruction can help.

[M.e.M.O.]

it did not work. Followed the steps , but i get an error which is not decreibed anywhere :

Code: Select all

UltraVnc Linux Repeater version 0.14
UltraVnc Wed Apr  1 14:40:51 2009 > listInitializationValues(): viewerPort : 5905
UltraVnc Wed Apr  1 14:40:51 2009 > listInitializationValues(): serverPort : 5505
UltraVnc Wed Apr  1 14:40:51 2009 > listInitializationValues(): maxSessions: 10
UltraVnc Wed Apr  1 14:40:51 2009 > listInitializationValues(): loggingLevel: 3
UltraVnc Wed Apr  1 14:40:51 2009 > listInitializationValues(): ownIpAddress (0.0.0.0 = listen all interfaces) : 0.0.0.0
UltraVnc Wed Apr  1 14:40:51 2009 > listInitializationValues(): runAsUser (if started as root) : uvncrep
UltraVnc Wed Apr  1 14:40:51 2009 > listInitializationValues(): Mode 1 connections allowed : Yes
UltraVnc Wed Apr  1 14:40:51 2009 > listInitializationValues(): Mode 2 connections allowed : Yes
UltraVnc Wed Apr  1 14:40:51 2009 > listInitializationValues(): Mode 1 allowed server port (0=All) : 0
UltraVnc Wed Apr  1 14:40:51 2009 > listInitializationValues(): Mode 1 requires listed addresses : No
UltraVnc Wed Apr  1 14:40:51 2009 > listInitializationValues(): Mode 2 requires listed ID numbers : Yes
UltraVnc Wed Apr  1 14:40:51 2009 > listInitializationValues(): Mode 2 allowed ID list (0=Not allowed): 1116 1113 1114 1115 1117 1121 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
UltraVnc Wed Apr  1 14:40:51 2009 > listInitializationValues(): useEventInterface: true
UltraVnc Wed Apr  1 14:40:51 2009 > listInitializationValues(): eventListenerHost : localhost
UltraVnc Wed Apr  1 14:40:51 2009 > listInitializationValues(): eventListenerPort : 2002
UltraVnc Wed Apr  1 14:40:51 2009 > listInitializationValues(): useHttpForEventListener : true
UltraVnc Wed Apr  1 14:40:51 2009 > startListeningOnPort(): socket() initialized
UltraVnc Wed Apr  1 14:40:51 2009 > startListeningOnPort(): setsockopt() success
UltraVnc Wed Apr  1 14:40:51 2009 > startListeningOnPort(): bind() to (ip: 0.0.0.0, port: 5905) succeeded
UltraVnc Wed Apr  1 14:40:51 2009 > startListeningOnPort(): listen() succeeded
UltraVnc Wed Apr  1 14:40:51 2009 > startListeningOnPort(): socket() initialized
UltraVnc Wed Apr  1 14:40:51 2009 > startListeningOnPort(): setsockopt() success
UltraVnc Wed Apr  1 14:40:51 2009 > startListeningOnPort(): bind() to (ip: 0.0.0.0, port: 5505) succeeded
UltraVnc Wed Apr  1 14:40:51 2009 > startListeningOnPort(): listen() succeeded
UltraVnc Wed Apr  1 14:40:51 2009 > routeConnections(): starting select() loop, terminate with ctrl+c
UltraVnc Wed Apr  1 14:40:52 2009 > handleRepeaterEvents(): in child process, starting doEventWork()
UltraVnc Wed Apr  1 14:40:52 2009 > openConnectionToEventListener(): connecting to 127.0.0.1:2002
UltraVnc Wed Apr  1 14:40:52 2009 > connectWithTimeout(): EINPROGRESS in connect() - selecting
UltraVnc Wed Apr  1 14:40:52 2009 > connectWithTimeout(): Error in delayed connection() 111 (Connection refused)
UltraVnc Wed Apr  1 14:40:52 2009 > openConnectionToEventListener(): connectWithTimeout() failed.
UltraVnc Wed Apr  1 14:40:53 2009 > cleanUpAfterEventProc(): Removing event posting process (pid=28098)
UltraVnc Wed Apr  1 14:41:07 2009 > routeConnections(): new server connecting, accepting...
UltraVnc Wed Apr  1 14:41:07 2009 > acceptConnection(): connection accepted ok from ip: **.**.**.***
UltraVnc Wed Apr  1 14:41:07 2009 > nonBlockingRead(): start
UltraVnc Wed Apr  1 14:41:12 2009 > nonBlockingRead(): returning 12 bytes
UltraVnc Wed Apr  1 14:41:12 2009 > checkIdCode(): RFB 003.016
׿G* is not IdCode string
UltraVnc Wed Apr  1 14:41:12 2009 > parseHostAndPort() start: id = RFB 003.016
׿G*
UltraVnc Wed Apr  1 14:41:12 2009 > parseHostAndPort() end: host = RFB 003.016
׿G*, port = 5900
UltraVnc Wed Apr  1 14:41:12 2009 > acceptConnection():  Mode 1 connections only allowed from viewers, closing connection