Everything OK, nothing to View :(((

[zaoka]

I created SC with encryption, when I start server and viewer I get message on server that it connected, however, viewer does not show any picture of remote PC.
That tray icon does not work on right click anymore.

I checked all files 10 times and can not find any problem. I created rc4.key and copied to both places...anyway it server report that its connected encryption should work ok.

Im testing both computer in LAN enviroment.

Thanks in advance for help.

Zaoka

[paulus47]

hi
did you start the viewer in lissten modus ?

thats way you dont get a reply from the server

so :
start the viewer in listen mode go to pc with sc application start it up , click [ internet remote ]
then you get on the viewer pc a massage that [computername ] wants to connect .......
click it for oke then your in de server pc !

p ;[edit] try to start first without encription ! becouse encription mode wil give some faults for me here

succes, Paul

[arctos]

Hm, even if no reply is here it looks to me just the same way I have a problem here (see [topic=14716][/topic]) - connection seems to be established (the SC server side says so...), the viewer's icon is dysfunctional an no screen / no question "... wants to connect..." is shown.

Looks somehow also a bit like the problem described for Ubuntu (https://bugs.launchpad.net/ubuntu/+sour ... bug/123631), other users seem to have the same problem for Debian.

Anyone any other idea?

[YY]

I created SC with encryption, when I start server and viewer I get message on server that it connected, however, viewer does not show any picture of remote PC.
That tray icon does not work on right click anymore.

I checked all files 10 times and can not find any problem. I created rc4.key and copied to both places...

Not only the rc4.key must be the same, you must be using the same version of dsmplugin for both ends.

Reference [topic=12187]SC with MSRC4Plugin[/topic] to see if you fall into this problem.

[arctos]

OK, sounds simple for the encrypted mode.

But I also have the same problem for not encrypted connections; the behaviour is pretty much the same - nothing is shown, no question to allow the connection and so on.

[YY]

But I also have the same problem for not encrypted connections;

Have you turned off the firewall when doing the test?

Some firewall will not shut down completely if you turn it off at its control GUI, many of them require reboot the pc

[Aspirin]

I've got the same problem. With non encrypted connection.

- I start vncviewer -listen first
- I run SC and choose connection, SC reports connection ok
- viewer doesn't show anything except for small few pixels high line on the top of the screen (it looks like viewer top bar before opening - sliding down), and viewer is "dead".

Something is wrong and I don't know what....

[ts]

I've got the same problem. With non encrypted connection.

- I start vncviewer -listen first
- I run SC and choose connection, SC reports connection ok
- viewer doesn't show anything except for small few pixels high line on the top of the screen (it looks like viewer top bar before opening - sliding down), and viewer is "dead".

Something is wrong and I don't know what....

Sounds identical to my problem. When a connection has been established nothing happens when clicking the systray viewer icon (unless closing the connection on the SC-side, which results in a bunch of vncviewer dialogues to pop up, the number of which depends on how many clicks where made). Holding the mouse over the thin line on top of the screen shows the hour glass. Windows 2003, correct port forwarded from router to viewer and no firewall issues (the proof of which being the fact that both computers say there is a connection established).

There are variations of behaviour from time to time and variations depending on whether rc23 or rel1 version is used, but in general it's identical to Aspirins description.

[edit]
solved the problem, check out my post here:
[post=57793][/post]
hope it helps.
[/edit]