Repeater program

Iam8up · Post by **Iam8up** » 2004-12-02 15:19

In the FAQ with images there are several images where I can't seem to find - I don't see any settings about a repeater on the server...

I have downloaded 'repeater.exe' from SF but it seems to be the same thing (maybe a later ver) from the one that was included in the installer...

I need to know both how to set a VNCServer to an ID code (assigning hostname and/or IP address to ID) and change the port for the repeater to 5901

ipsec · Post by **ipsec** » 2004-12-02 19:27

[topic=1287][/topic]

RC_19 is still in dev. However the faq with pictures you talk about goes over Repeater II settings which is in RC19.

Guest · Post by **Guest** » 2004-12-14 22:38

Would you recommend RC17 then?

ipsec · Post by **ipsec** » 2004-12-16 21:09

Repeater for RC_19 looks and was pretty simple to set up... didnt really go too far into testing.

I would suggest picking 19 due to the fact that there is a seperate forum for just those users and you may get a better reply.