Here's my custom.zip that i uploaded to get the SC exe:
http://pub.cyberworldz.org/cyberworldz_org.zip
I can't rely on the guides and the forum-faq because following their instructions eiter does not work, makes no sense, or is such a bad english that it does not result in real scentences (similar to "copy in connect is in while read DIRECT edit so!").
So i'ww walk trough what i did:
1. Download & extract "custom.zip"
2. Change "helpdesk.txt".
First problem: What do i use under [HOST]?
- The guide says i should use "-plugin -connect IP:5500 -noregistry". (replace IP by your viewer's ip, single-colon, IP only!?)
- The FAQ says i should use "-plugin -connect HOSTNAME::5500 -noregistry". (, replace HOSTNAME by your viewer's hostname. Note the double colon! Is this required to use host names??)
- I used "-plugin -connect intranet-cyberworldz.dyndns.org:5500 -noregistry". (Seems to be the only thing that makes sense. I use dyndns and proved i can connect. [I'll get to that below.])
3. Create "rc4.key".
a. Download and install UltraVNC. Leave all checkboxes disabled while installing, because we need no server here, and there is no explanation for them anyway.)
b. start "vncviewer.exe", choose the plugin, click "configure" and generate the key.
Second problem: The plugins can not be found!
So after searching the readme, the site, and the forum after 30 minutes i finally found the casual note that you have to copy the plugin(s?) from the "plugins"-directory to the main directory of ultravnc. WTF? Then what is the plugins dir for? Am i missing something?
Third problem: "MSRC4Plugin.dsm" can't rcreate the ky and terminates with an error. But bpparently "MSRC4Plugin_noreg.dsm" seems to work end i copy "new_rc4.key" over to my working dir sa "rc4.key.
4. Pack it all together as "cyberworldz_org.zip" and use the online-creator.
Fourth problem: The link of the guide (http://www.uvnc.com/addons/singleclick.html) to the generator (http://sc.uvnc.com/index.php?section=19) sends me to an error page, but luckily a tiny link (why is's this the biggest fuckin link on the page?) sends me to the correct page: http://www.pchelpware.com/creator/index.html (Disguised as http://ultravnc.sourceforge.net/ in an iframe! WTF? My Firefox practically screamed "scam"!)
Fifth problem: Two creators? Which one do i use??
After searching the forums for another half hour i got another tiny note to use 1.0 (I guessed that. But then why is the RC23-version still there? Are there special situations where you need it, and could i be in this situation? No answers again...)
Ok, so i ran 1.0
5. Allow the firewalls to allow connections to the local port, and enable DNAT:
a) I use shorewall on my linux router/server and outpost pro on my local box, so i added the following to my "rules"-file:
"DNAT net $DNATTER tcp $VNC_CLIENT_PORTS_TCP"
where $DNATTER is my internal ip and $VNC_CLIENT_PORTS_TCP is 5500.
b) next i started vncviewer.exe and told outpost to allow incoming tcp-connections on 5500 from any host to vncviewer.exe.
c) A quick test:
Use my webserver's ssh-shell to run telnet to connect to the port and see if vncviewer notices this.
Yep. I can connect. But stupidly vncviewer can't load the dsm-plugin and after some seconds wants to use a non-encrypted connetion. This fails of course because i used telnet, so that's ok.
Sixth problem: What's not ok is that the stupid dsm-plugins all lie in the same directory as "vncviewer.exe". So why can't they be loaded??
Whatever. Let's first try non-encrypted connections and work on the rest when the basic stuff works.
d) Close "vncviewer.exe"
Seventh problem:
Right clicking on the icon in the task bar and choosing "close VNC-server"...no wait... shouldn't this be "close VNC-CLIENT"? WTF???
Where is the close-option in that menu?? Great the only way to close that thing is to use the task manager! GREAT! Really...!
6. Start the "vncviewer.exe" and use the resulting "cyberworldz_org.exe" to connect, once with and once without the encryption.
a) Eighth problem: The vncviewer seems not to recognize the connections from my SC ("cyberworldz_org.exe") running on the same platform. So i also can't find out if the the encyption works. Now what do i do now??
b) After searching for another 15 minutes (i'm getting a routine) i found out that you can extracd the exe and change the "helpdesk.txt" to test stuff, so i do it and change the line "-connect intranet-cyberworldz.dyndns.org:5500 -noregistry" to "-connect 127.0.0.1:5500 -noregistry", and:
HEY, it finally works... well.. sort of...
c) Now let's try this with the encryption. I changed the line "-connect intranet-cyberworldz.dyndns.org:5500 -noregistry" to "-connect 127.0.0.1:5500 -noregistry".
a) Ninth problem: Crap. "Invalid protocol". Then how do i change it? I can't see any encryption-settings for the listening viewer...
Again... after 15 minutes of searching i got the tip to use the command line to enable the dsm-plugin. So i used "vncviewer.exe /dsmplugin MSRC4Plugin_NoReg.dsm /listen".
7. Final death! I'm officially pulling my hair now! (Tenth problem:)
a) Ok, vncviewer runs with the above mentioned parameters.
b) cyberworldz_org.exe is extracted and i'm starting winvnc.exe. As administrator to be sure it's not that!
c) The unencrypted connection to 127.0.0.1 did work as we have seen above.
d) So i'm trying the encrypted connection, and...
ERROR: "The Plugin cannot be loaded. Please check its name integrity"
ERROR2: "Connection failed - Invalid protocol !"
This did not help: [topic=3386][/topic]
The whole situation can only be described in tho form of a MASTER PAIN quote: http://pub.cyberworldz.org/evil%20plan.mp3
What can i do now? How can i make this work? Please, please...

Thank you!
