Connection breaks after a short time when I use dsm 1.1.8.0

Misses Nexmetch · Post by **Misses Nexmetch** » 2006-07-18 11:22

Hi folks,

I have been using the dsm plugin on quite a few computers for a long time with no problems. Now we aquired four new servers and each one of them has the connection breaking after 1 to 5 minutes when using the dsm-plugin 1.1.8.0. Without it: no problems.

What makes these servers different is, that they are on a different subnet AND they are linked using 10 Mbps instead of 100 like the others. Furthermore, they have dual xeon processors (the others are single P4), but I can't believe that this could be the matter.

Could the slower link or the different subnet be a problem when used together with dsm? Seems like.
OS are 2003 SP1 and Win2k server SP4, VNC version is 1.0.1, video driver version is 1.19.0.0

Thanks for any hint.

redge · Post by **redge** » 2006-07-18 22:14

should be issue of vncviewer codec switch failed during connection caused by vncvncviewer quick option = AUTO,
select another quick option like LAN if you are over LAN - LAN (not over Internet) and should solve your issue.

Misses Nexmetch · Post by **Misses Nexmetch** » 2006-07-20 09:00

Hi Redge,
thanks, but unfortunately that does not seem to change the behaviour.
Is there any theoretical possibility that the slower link or the different subnet is a problem when used together with dsm?

bevtech · Post by **bevtech** » 2006-07-20 14:02

connection speeds will cause issues with Uvnc in general. 56K or less is a major issue with dsm. Subnets really should cause too much of an issue as long as they have proper routes in place traffic to pass through properly..

redge · Post by **redge** » 2006-07-20 19:54

Is there any theoretical possibility that the slower link or the different subnet is a problem when used together with dsm?

I have totally no idea about this point.

should be an issue with MSRC4plugin and windows 2000 ,
fix the issue using ARC4plugin based rc4 but key name is arc4.key
http://msrc4plugin.home.comcast.net/arc4plugin.html

or
wait this week-end or next week for upcoming new build of MSRC4plugin more stable for windows 2000 with some fix
[topic=7123][/topic]

redge · Post by **redge** » 2006-07-28 01:04

Is there any theoretical possibility that the slower link or the different subnet is a problem when used together with dsm?

[post=27208][/post]

UltraVNC

Connection breaks after a short time when I use dsm 1.1.8.0

Connection breaks after a short time when I use dsm 1.1.8.0

Re: Connection breaks after a short time when I use dsm 1.1.

Re: Connection breaks after a short time when I use dsm 1.1.

Re: Connection breaks after a short time when I use dsm 1.1.

Re: Connection breaks after a short time when I use dsm 1.1.

Re: Connection breaks after a short time when I use dsm 1.1.