Loosing my mind on SC

[dneel]

Have the system set up fine and working on the LAN.

have changed the files to use the :: in the connection line

have set the nat statements on my router, but it does not connect.

client -? -Internet - my router -me

Setting looks similar to this (a.b.c External, 1.2.3 Internal)

[HOST]
CTENOC 1
-connect a.b.c.122::5500 -noregistry

[HOST]
CTENOC 2
-connect a.b.c.122::5501 -noregistry

[HOST]
CTE Internal 1
-connect 1.2.3.240:5500 -noregistry

[HOST]
CTE Internal 2
-connect 1.2.3.241:5500 -noregistry


again everything works land based, what am I doing wrong? Do I have to use the repeater or nat2nat applications?

Thanks for any help.

[redge]

work internally, OK

so, for external use is 2 cases of common issue

• firewall or bad NAT translation (hardware error of box broadand or human error misconfiguration of wrong port/ip)
• antivirus (block some software outgoing call)

check your internal ip is out of DHCP or reserved IP as MAC address on DHCP

or maybe a common test error
from UltraVNC FAQ
[topic=6914][/topic]
[topic=5429][/topic]