Assigning ID numbers to various ports.

[Jhpersol]

I am not an expert on Networking and such but I am trying to establish a VNC SingleClick connection with a Repeater and I'm having some issues.

How do I assigned an ID number to a specific port number if I am port forwarding from an external ip address of an office network? SO for example I would like to have

Ext. IP: 34.54.23.111:(Port Number)

Port Number 5901 ----> ID #100
5902 ----> ID #101
5903 ----> ID #102
...etc
How can i assign these numbers 100, 101, 102, etc to a specific Port number that I forward?

Also, after this, how do i assign a specific port # (such as 5901, or 5902) to an Internal IP address, so that UVNC knows to forward an incoming connection to the proper internal ip address from an external ip address?

I hope I'm making sense....

-Justin

[bevtech]

How do I assigned an ID number to a specific port number if I am port forwarding from an external ip address of an office network? SO for example I would like to have

Ext. IP: 34.54.23.111:(Port Number)

Port Number 5901 ----> ID #100
5902 ----> ID #101
5903 ----> ID #102
...etc
How can i assign these numbers 100, 101, 102, etc to a specific Port number that I forward?

well the ID's are really port numbers.
So an ID5902 --->5902
ID100 ---->100
ID101 ----->102

So you may want ID5901, ID5902, ID5903

Also, after this, how do i assign a specific port # (such as 5901, or 5902) to an Internal IP address, so that UVNC knows to forward an incoming connection to the proper internal ip address from an external ip address?

Two ways

One is just to open the ports for all your unvc servers

Two is to use a repeater that handle up to 20 connections for you.
The link below has a few step by step's one is the repeater..
[topic=5891][/topic]