NAT2NAT update (11 May)

[Rudi De Vos]

*The nat2nat version that was included in v1.02 didn't worked on 9.x.
Bug fixed

Added 128bit encryption

Update available
http://sc.uvnc.com/V2/connectors.zip

----------------------natconnect.txt----------------------
natconnect_viewer need to be in the same directory as
the vncviewer. AFter connection is made, viewer is auto started.

natconnect_server connect in loopback mode to the server.
Server must be running, before you start the connector (timeout)
Allow loopback must be [v] in the server options.

The connectors now also encrypt all data using a 128 bit twofish encryption. So even without a dsm plugin data is
encrypted. The key is generated on both sites, based on the
connector password.
The 2 first bytes of the password are not secure, used for a check with the
nat service on uvnc.com, and pass the internet in a DES encryption, DES is breakable !!
So, make sure your password is at least 10 bytes long, to have a secure twofish key.
-------------------------

[Rudi De Vos]

Started wrong service on uvnc.com ---> no connections where possible
I guess it was been runnning incorrect for a week ....

Correct service started..

[roytam1]

Started wrong service on uvnc.com ---> no connections where possible
I guess it was been runnning incorrect for a week ....

Correct service started..

I got a 'wrong password...' message.
And, could you please fix the tab foucs issue of the NAT server/viewer connectors?

[Rudi De Vos]

service offline...

Timeouts are to small causing server being flooded be connection attemps. I first need to fix this, service was using 40% of the network
resources...

[Rudi De Vos]

connectors contain error...

Server announce himself as viewer AND server
--->this almost always gives ->wrong passwd (time issue)

[Rudi De Vos]

Errors corrected
Please upload new connectors

http://SC.uvnc.com/V2/connectors_update.zip

service back online

connector_server respan
connector_viewer close on viewer exit

[Rudi De Vos]

NOT WORKING....

debug mode all works OK, but release exe always have wrong passwd..

Don't use until update

[redge]

natconnect 2.0 before push to official uvnc 1.0.2.
Any news for real public test without debug mode ?

[rich2033]

Hi,
The last message from Rudi says not to use Nat2Nat until there is a message posted here.
The Notes about ver 1.0.2 say Nat2Nat is not included
We are looking forward to this function working
What is the situation?

[Rudi De Vos]

The old version is still working (use other ports)

The new version is working but i was not satified.
The problem is that Nat2Nat only works on non symmetric routers
and total fails when you are only allowed to use a proxy.

So i'm trying to combine multiple methods in 1 connector module.
Server and viewer need to agree on a protocol they both can use ..

Not that easy...

+direct TCP
+direct using Nat bouncer
+TCP bouncing
+TCP bouncing using proxy

The enduser just need to provide naam and password and all should work without any configuration.

[redge]

The old version is still working (use other ports)

Not working even after waiting 10 min.
NSC and NVC staying yellow color status

[RobH]

anymore changes in nat2nat? I am waiting for this. I'm surprised it's not talked about more. This pretty much gets around everything. Looks like it will work like logmein.com does.

The old version is still working (use other ports)

Not working even after waiting 10 min.
NSC and NVC staying yellow color status

[Rudi De Vos]

The name has changed
[topic=7542][/topic]

This is an attemp to integrate several parts as one exe.
Status is still Alpha.