viewver closes after authentication

schlogo · Post by **schlogo** » 2006-01-16 18:53

hello

i am using the last version of the server with simple mslogon. I get the authentication box, enter username and pasword then the viewver window disappears and that s it. After a while and can try again but not luck.

Can it be that i can t get access if no user is logged in on the other side?is it a known bug?

Guest · Post by **Guest** » 2006-01-17 12:19

please click on 3 topics below available on UltraVNC FAQ ...
[topic=58][/topic]
[topic=61][/topic]
[topic=3276][/topic]

JVH · Post by **JVH** » 2006-01-19 18:36

I am experiencing the same problem. If I go to a machine that is not logged on, I can send CAD and get the signon but it disconnects VNC and I have to reconnect. (using Win 2000 pro)

schlogo wrote:hello

i am using the last version of the server with simple mslogon. I get the authentication box, enter username and pasword then the viewver window disappears and that s it. After a while and can try again but not luck.

Can it be that i can t get access if no user is logged in on the other side?is it a known bug?

bevtech · Post by **bevtech** » 2006-01-20 00:52

I am wondering if this maybe the problem..
FAQ- After Entering VNC Password-Nothing Happens
[topic=5580][/topic]

Also make sure that you have winvnc installed as a service for CAD to work.

FAQ-Sending CTRL-ALT-DEL to the server does not work. Why ?
[topic=61][/topic]

just some ideas..

JVH · Post by **JVH** » 2006-01-20 23:22

Not sure if this reply was for me or the other person.
My CAD works but the act of processing the microsoft login causes the viewer to disconnect. When I reconnect the system is logged on and ready. Acts like the VNC service is restarting during the logon process.

bevtech wrote:I am wondering if this maybe the problem..
FAQ- After Entering VNC Password-Nothing Happens
[topic=5580][/topic]

Also make sure that you have winvnc installed as a service for CAD to work.

FAQ-Sending CTRL-ALT-DEL to the server does not work. Why ?
[topic=61][/topic]

just some ideas..

redge · Post by **redge** » 2006-01-21 00:00

There a bug,
if you had installed winvnc before creating a new account "user2" on your winxp Fast User Switch
winvnc is not sync as HKLM is not read correctly from the next user account (admin/limited) same issue

schlogo · Post by **schlogo** » 2006-01-23 05:50

well i ve found what is wrong but no solution yet...On this server, i have a belbin switch for the monitor, keyboard and mouse( means a server, a pc and only one monitor) If the user is not switching to the server, i have the autentication box and then it desappears

o

Tjoek · Post by **Tjoek** » 2006-01-23 13:03

I have a simmular something.
I can connect to the server and then come in the XP Pro MS login.
After put in the password and then try the login the viewer disconnect.
I think the problem is the MS Antispyware 2006 Upgrade but i'm not sure yet.

bevtech · Post by **bevtech** » 2006-01-23 14:53

A few ideas

Does the account(s) that you have programed in winvnc has logon rights to the pcs??

If you disable the mslogon I and II and use only classic authenication does it work?? (Just checking to make sure Ultra VNC is working properly)

Did you put a password in for classic authenication eventhough you are mslogon you have to have classical authenication password enabled..

schlogo · Post by **schlogo** » 2006-01-26 22:32

here is the issue now:

I have a server and a workstation connected on a kvm so i have only one keyboard, mouse and flat screen.

If the kvm is set on the pc, i can t connect to the server, whatever settings i am using in vnc

if the kvm is set on the server, it s all fine, has someone experienced that ?

bevtech · Post by **bevtech** » 2006-01-27 16:20

schlogo,

I have a server running on a kvm switch with 3 other pcs. I do not experianace any problem accessing the server. Unless the I forget to enable the UVNC service..

The KVM switch should not be causing you problems with Ultra VNC.. This is kinda puzzling..

schlogo · Post by **schlogo** » 2006-01-27 21:01

redge · Post by **redge** » 2006-01-28 10:21

I think, if available function, change the hotkey of your KVM switch

schlogo · Post by **schlogo** » 2006-01-28 15:39

ok i ll try

jackson57 · Post by **jackson57** » 2007-04-05 16:39

I have the same problem schlogo. Did you ever get it to work? I'm using an AMCONN KVM10E15LC http://www.amconnstore.com/products/kvm ... VM10E15LC/

The console works fine when I connect it to two desktop Pc's so I don't know whats causing the problem.

UltraVNC

viewver closes after authentication

viewver closes after authentication

Re: viewver closes after authentication

problem found

kvm

vnc service

Re: viewver closes after authentication