Won't work on both encrypted and no encryption

Silivrenion · Post by **Silivrenion** » 2005-12-03 23:22

For some reason, the plugin I have wont work in both encrypted mode and non encrypted mode. I am using the No Reg version of the dsm, version 1.1.8.0 according to the file.

I set the vnc viewer to start with these options:

"C:\Program Files\UltraVNC\vncviewer.exe" -dsmplugin MSRC4Plugin_NoReg.dsm -listen

SC client's config:

[HOST]
1. Internet support server
-connect (address).com:5500 -noregistry

[HOST]
2. Internet support server w/encryption
-plugin -connect (address).com:5500 -noregistry

Problem :: the SC client cont connect to the vncviewer on host 1. It gives the below error. If I take the -dsmplugin option out of the viewer, the exact reverse happens. host 1 connects but host 2 gives the below error. Can Anyone Help!?

bevtech · Post by **bevtech** » 2005-12-04 01:30

Silivrenion,

Did you copy the noreg.dsm to the c:\Program Files\UltraVNC\ directory??

Did you test in a lan setting?? If not that would be a very good test.

You also have to port forward ports from the WAN IP to your internal IP port
Single Click default port is 5500.

Did you take a look at Dwalfs Single Click step by step
[topic=4606][/topic]

Along with UltraVNC SC Manual
[topic=4530][/topic]

Hope this helps,

Silivrenion · Post by **Silivrenion** » 2005-12-06 11:59

I copied the nreg.dsm to both the ultravnc directory, and its included in the .exe of the SC

ports are forwarded too

The problem is that the SC connects on either no encryption, or encryption, never with both.

If i DONT include -dsmplugin in the path for the viewer, host 1 will connect, but not 2.

If i DO include -dsmplugin in the path for the viewer, host 2 will connect, but not 1.

It seems to me that while including the -dsmplugin option, the viewer should be able to receive both encrypted and nonencrypted, it just makes it more adept.

bladi · Post by **bladi** » 2005-12-06 14:25

hi

If you have e look on the UltraVNC site you will see somthing diverent to your infos about MSRC4Plugin_NoReg.dsm. there are only infarmations and downloads about the MSRC4Plugin.dsm and there is no other word about this noreg.dsm file... way the UltraVNC comunity do not update teyer informations about SC?

http://sc.uvnc.com/index.php?section=15

bladi

bevtech · Post by **bevtech** » 2005-12-07 01:22

baldi,

I know that they are looking for help in the documentation project. Do you want to assist.

They are so very few people who contribute to the project in the documentation area. I try to find things that need updated and sent the information to people in charge but there is a lot to go through. If you find sections that are in need of updated try to post them into the doc writers topic so that I can see if I can get them updated..

Thanks for your efforts and help making Ultra VNC better..

Silivrenion · Post by **Silivrenion** » 2005-12-10 15:09

back on topic, my configuration is correct, but the viewer wont receive both encrypted and nonencrypted connections in one session, thats just the point of it. If the listening viewer can receive encrypted and nonencrypted without having to open two different client on two different ports, then it will probably work.

Dwalf · Post by **Dwalf** » 2005-12-10 21:06

Silivrenion wrote:back on topic, my configuration is correct, but the viewer wont receive both encrypted and nonencrypted connections in one session, thats just the point of it. If the listening viewer can receive encrypted and nonencrypted without having to open two different client on two different ports, then it will probably work.

So your saying when you setup your helpdesk.txt file to use one connection as encrypted and another connection as non encrypted and you setup your viewer to use encrypted you get this problem?

Am i right?

I dont use encrypted connections myself. but have seen something like this. Has to do with the plugin setting and not having the vncviewer setup.

Dwalf

Dwalf · Post by **Dwalf** » 2005-12-10 21:40

Hope this helps. I have not tested but hopefully if we make a start we all will know.

Use at own Risk

1. Download the DSM Plugin from (Please visit these this site, good guys)

http://msrc4plugin.home.comcast.net/index.html

Download
http://msrc4plugin.home.comcast.net/msr ... gin118.zip

2. Copy the plugin file from the ZIP file into your UltraVnc directory where your vncviewer.exe and other files are.

3. Double click on the VNCviewer.exe -listen icon running in the taskbar.
(Start vncviewer -listen if not in taskbar.)
When open you now will see the plugin avalible. Select the plugin and TIk the check box and click on config.

4. You now have the option to create the rc4.key file. click on the GEN KEY button to make the file.

5. You now will see the NEW_RC4.KEY file in your ULTRAVNC folder. Rename this file to RC4.KEY and add it to your SC Package and then use the online creator to make your exe.

6. You now need to change your helpdesk.txt file and include the [-plugin] option.

-plugin -connect (IP/Domain):5500 -noregistry

7. You need to exit the vncviewer and run it with the [-dsmplugin] option.
vncviewer.exe -listen 5500 -dsmplugin MSRC4Plugin_NoReg.dsm

Hope this helps.
For you document guys cut and past this section if you want.

Cheers
Dwalf

bladi · Post by **bladi** » 2005-12-12 10:58

hi

this is the only error I geth if I would generate a rc4.key file. I have done all like Dwalf has writen in his how to (thx for... ;->)

I have found the problem in the path. the correct one is

Code: Select all

 "C:\Program Files\UltraVNC\vncviewer.exe" -listen

and you will get a well generated new_rc4.key.[/b]

start the machine joe...! I have done like Dwalf, but so it was no encrypted viewer start possible and I got a error like [topic=4494][/topic]... so now I start the viewer with the code in the down codebox and it works just great

Code: Select all

"C:\Program File\UltraVNC\vncviewer.exe" -listen 5500 -dsmplugin MSRC4Plugin_NoReg.dsm

I was creating a shortcut and put all this in there... now plugin starts on the viewer side and it works grat againe...

hope it helps..

bladi

Silivrenion · Post by **Silivrenion** » 2005-12-22 03:16

I know how to use the plugin and get all that jazz to work, so before my topic becomes filled with replies that people wont create their own topics about, i'll revert back to the main topic again.

Yes dwalf, that is what I am saying. I have the client configured to connect to the listening viewer with both encrypted and nonencrypted connections, but the viewer is only establishing connections with whichever type it receives. It is almost as if the viewer can't handle a nonencrypted connection once given the -dsmplugin option.

So what am I to do now?

Dwalf · Post by **Dwalf** » 2005-12-23 19:50

Silivrenion wrote:
So what am I to do now?

I know what your saying. You want to viewer to handel both or either encrypt and non-encrypt.

Not sure if it can do that. Perhaps Rudi and the guys will know.

Cheers
Dwalf

redge · Post by **redge** » 2005-12-24 00:04

UltraVNC Viewer don't yet allow automatic recognition of dsmplugin like RealVNC do with their automatic encryption password and uncrypted password

Maybe in later release UltraVNC
(do not ask when... nobody know if available or not)

there exist a lots of developers don't give back a little bit part of code return fix, feature)
just take it as one way and modify just for himself...and won't share back to open source community

Silivrenion · Post by **Silivrenion** » 2005-12-24 16:25

Well then lets push the suggestion to the developers. This is a sourceforge project after all...

UltraVNC

Won't work on both encrypted and no encryption

Won't work on both encrypted and no encryption

diverent infos on UltraVNC site...

it works not on my PC's