SC not working

[Hoott]

okay i followed the instructions for setting up an SC..installed UVNC and opened to listening mode..and tested it with my friend and im not getting anything....i have a dynamic ip and set port forward on my dlink (DI-524) router to 5500 (both tcp and upd) and i get no connection the viewer is in listneing mode and my friends SC says listening but nothing happens

Router set up


helpdesk.txt file
[TITLE]
Home Support

[HOST]
Home Support Connect
-connect 68.158.123.145:5500 -noregistry

[HOST]
Home Support Connect
-connect 68.158.123.145:5500 -noregistry

[TEXTTOP]
Double Click Internet Support To Begin!

[TEXTMIDDLE]
Before making a connection

[TEXTBOTTOM]
Please call xxx-xxx-xxxx!!!

[TEXTRBOTTOM]
Best at Home Support available.

[TEXTRMIDDLE]
Messay Gebre

[TEXTRTOP]
Home Support

[TEXTBUTTON]
Donate!

[WEBPAGE]


[TEXTCLOSEBUTTON]
CLOSE


[BALLOON1TITLE]
Establishing connection ...

[BALLOON1A]
5 min connection trial period

[BALLOON1B]
If connection fails, the software will remove itself

[BALLOON1C]
from your system.

[BALLOON2TITLE]
Connection active.

[BALLOON2A]
Your are now connected to Home Support

[BALLOON2B]
You can break the connection any time

[BALLOON2C]
by using the close button

[WEBPAGE]
hit here with

do i need to set up DNS stuff...or repeater...and if so how do i do that...please help...great idea (cant say great program cuz it hasn't worked for me yet)

[bevtech]

Can you test this in a local area network??? There has been some talk on the forum with some of the D-link routers having issues on with VNC maybe you are having that problem??

[Hoott]

PostPosted: 2005-11-08 07:57 Post subject:
Can you test this in a local area network??? There has been some talk on the forum with some of the D-link routers having issues on with VNC maybe you are having that problem??

how do i test....like use the wireless laptop that my bro uses and test it.

[bevtech]

well you have to have two pcs in the same network and on the same subnet.


Bascially you load the stand alone viewer on both pcs. Then try SC on one pc then the other..

An example:
two pcs on the same router

[Dwalf]

PostPosted: 2005-11-08 07:57 Post subject:
Can you test this in a local area network??? There has been some talk on the forum with some of the D-link routers having issues on with VNC maybe you are having that problem??

how do i test....like use the wireless laptop that my bro uses and test it.

Hi try changing the protocol to TCP only and do a local test from here

[topic=4535][/topic]

Also check if you dont have a diff WAN IP if on dynamic

http://www.checkip.org

check if the ports not block or cannot see the vncviewer here

http://www.canyouseeme.org

Lastly check all firewalls router and windows

Cheers

[Hoott]

well i set up router as supposed to be but canyouseeme.org

Error: I could not see your service on 68.158.123.145 on port (5500)
Reason: Connection timed out

how do i find out "IP address of the computer on your local network" because when i type ipconfig in command prompt it gives me the adress of the router

[Dwalf]

well i set up router as supposed to be but canyouseeme.org

Error: I could not see your service on 68.158.123.145 on port (5500)
Reason: Connection timed out

how do i find out "IP address of the computer on your local network" because when i type ipconfig in command prompt it gives me the adress of the router

Here try this online test, The support.exe tells you what to put in the the client exe. Basicly made this one for LAN.

http://freehost04.websamba.com/duckware ... upport.htm

Hope it helps. Use at own risk.

Cheers
Dwalf