UltraVNC service - reverse connect before login with ID

superwopguy · Post by **superwopguy** » 2005-10-07 13:16

Please allow the possibility to start winVNC server service as a reverse connect with an ID. Thank you very much. You guys are the best.

bevtech · Post by **bevtech** » 2005-10-07 14:43

SCIII
http://sc.uvnc.com/SCIII/

It is in beta now..

I use it all the time

superwopguy · Post by **superwopguy** » 2005-10-09 13:42

You said that you use it all the time.

Can you please tell me how?
winvnc -service doesn't work.

but winvnc -install does work.
Please explain...

bevtech · Post by **bevtech** » 2005-10-09 15:38

Single click III is a reverse connection. I have it with the repeater coming in to my LAN. The only drawback that I have came across is that the port 433 has to be directly ported in and not bounced into many Nat to NAT.

Always look at the FAQ they have alot of useful information in there
http://forum.ultravnc.net/viewforum.php?f=9

So basically you create your SCIII using the
I include the *.pem file so that the ssl tunnel can be created

http://sc.uvnc.com/index.php?section=19
I use the test exe compilier to create mine.

Then you setup your repeater II on a machine on your LAN.
[topic=1340][/topic]

Forward the following ports to it from your router or WAN IP address

port 5500 to your repeater port 5500
port 443 to your repeater port 443

You have to use the vnc viewer crash fix.exe for the ssl proxy to work properly. I simply renamed to the vncviewer.exe and use it that way

I hope this helps,

redge · Post by **redge** » 2005-10-09 16:24

superwopguy

you speak about winvnc (classic) or winvncSC (SingleClick)?

superwopguy · Post by **superwopguy** » 2005-10-09 18:48

I'm curious to know all of winvncscIII.exe swtches.

I'm curious to know all of winvncsc.exe swtches.

I'm curious to know all of winvnc.exe swtches.

Please claify. Because all the switches of the following page doesn't all work.

http://ultravnc.sourceforge.net/install/cmdline.html

redge · Post by **redge** » 2005-10-09 21:12

the only way for know all switches availabled is read the CVS code of UltraVNC winvnc, winvncsc, winvncscIII or some dev want to leave their all switches, but now, only partial doc available.

there a lot of command are from realvnc 3.3.6 for classic winvnc
but all others stay misterious command line available.

bevtech · Post by **bevtech** » 2005-10-10 00:21

I took me some time to figure out how to make my vnc work best for me. You may have to due some testing because everyone uses VNC differently. I use SC for my clients and classic vnc for all of my workstations in my office.
If you want to devote some time and figure it exactly what each switch does that isnt documented I am sure that the developers and doc writers would appricate the help..