UltraVNC 1.4.0.9 - Feedbacks

[Rudi De Vos]

Feedbacks for UltraVNC 1.4.0.9 in this topic.

Announcement and Download links:
- viewtopic.php?t=37757

[ddbivens]

I know it is just cosmetic, but after installing the 1.4.0.9 x64bit version, I get notes for the 1.4.0.8.
**********************************************************************

UltraVNC 1.4.0.8 Release - Januari 2023

Copyright (C) 2002-2023 UltraVNC Team - All rights reserved

**********************************************************************

[stefanorossetti]

stefanorossetti wrote: ↑2023-02-14 14:51
from version 1.4.0.5 up to the latest 1.4.0.8 it is very slow when using the vncview repeater when "negotiate protocol version". If 1.3.8.1 is used it is always fast in all operations.
same issue,though the 1.3.8.1 part not confirmed yet

Could it be that simple.
The logging is now logging the viewer name instead of the ip, but dns can take 20s to lookup.
building a version that log the old way

Yeah looks like I have the same issue. If there is no reverse zone for the ip range the viewer is on, it take 20+ seconds to connect (tested on 1.4.0.6). This does not occur on 1.3.8.1. Adding a reverse zone and having an entry for the viewer pc resolves the issue.

I do not log on the server, but I do have an incoming connection query window which display's the dns name of the viewer pc on the server.

I did some tests and with version 1.4.0.9 now the connection is fast, I no longer encountered latency problems with repetear. problem solved for me. Thank you

[ddbivens]

I installed 1.4.0.9 (todays release) on about a dozen PCs today. Then I realized the vncviewer.exe was still reporting 1.4.0.8. I checked the file dates. It appears the zip and .exe both have the old version of the viewer in the 64bit release. It appears the 32bit release of the viewer is current.
I appreciate all the work you do on this program. Thank you very much.

[Rudi De Vos]

Thanks for the info, wil fix it this evening ( gmt)

[Sander02]

Hi, is your advice to always start with a fresh ini file of the current version, then change settings and deploy that ini file. Or as we do now for years use the same ini files for all versions? We don't use any new functionality.

[Rudi De Vos]

Use the old ini
New settings use the default until you change them, then the are added to the ini

[lwc]

What is the new logging.dll? Why is it it needed? The file description mentions MS-Logon.

[Lucent]

I've updated two pc from 1.3.8.1 to 1.4.0.9 and we can not validate with ms-logon v1. The error registered on events viewer. samcli.dll 0xc0000005

Code: Select all

Nombre de la aplicación con errores: WinVNC.exe, versión: 1.4.0.9, marca de tiempo: 0x6408d641
Nombre del módulo con errores: SAMCLI.DLL, versión: 6.1.7601.17514, marca de tiempo: 0x4ce7c969
Código de excepción: 0xc0000005
Desplazamiento de errores: 0x0000000000002434
Id. del proceso con errores: 0x27c4
Hora de inicio de la aplicación con errores: 0x01d9558e1277d8bd
Ruta de acceso de la aplicación con errores: C:\Program Files\UltraVNC\WinVNC.exe
Ruta de acceso del módulo con errores: C:\Windows\system32\SAMCLI.DLL
Id. del informe: a73fab51-c18b-11ed-93d4-005056bb6908

[Rudi De Vos]

logging.dll: This file is used for the access logging -> mslogon.log
Before
5/8/2022 20:41 Connection received from x.x.x.x
5/8/2022 20:41 Client x.x.x.x disconnected
now
13/03/2023 20:40:54 Connection received from x.x.x.x
13/03/2023 20:40:59 Password authentication accepted from x.x.x.x (Interactive) (ID:1)
13/03/2023 20:41:10 Client x.x.x.x disconnected (Interactive) (ID:1)

[Rudi De Vos]

Lucent Can you provide more info when it happen ?

Cpu
OS: Windows 7?

[MSOiD]

Did some testing with 1.4.0.9 and just like in 1.4.0.6, when you set:

QueryAccept=2
QueryIfNoLogon=0

it auto accept the connection, but it should auto reject when user is logged in and accept when user is logged out.
In 1.3.8.1 it works fine, tested on 2 Windows 10 22h2 notebooks.

[bwagoner17]

I tried updating to this version and when deployed out using the config we have always used since 2016, it seems like i'm unable to get any newer version to work properly via batch file. I have 1.3.60 that works well with the config and any version before that always worked fine. I tried updating to 1.3.81 when i updated the image last time around and it had an issue where once installed, no one was able to VNC into those machines any longer so I rolled back to 1.3.60. I'm having the exact same issue when I try going to 1.4.0.9. It pops up an error for the person trying to UVNC in and says unable to start VNC service on "insertmachinenamehere"

Can someone tell me if these switches have been deprecated in the new versions or something, i've looked around a lot but not finding much information about it.

%~dp0UltraVNC_1_3_60_X64_Setup.exe /silent /loadinf=%~dp0config.ini
net stop uvnc_service
sc config uvnc_service start=demand
rd "C:\ProgramData\Microsoft\Windows\Start Menu\Programs\UltraVNC" /S /Q
copy %~dp0ultravnc.ini "C:\Program Files\uvnc bvba\UltraVNC\" /Y
exit

[Rudi De Vos]

Checking all issue's.
Started with MSlogon I: could repeat it, working on this problem

[bwagoner17]

I tried updating to this version and when deployed out using the config we have always used since 2016, it seems like i'm unable to get any newer version to work properly via batch file. I have 1.3.60 that works well with the config and any version before that always worked fine. I tried updating to 1.3.81 when i updated the image last time around and it had an issue where once installed, no one was able to VNC into those machines any longer so I rolled back to 1.3.60. I'm having the exact same issue when I try going to 1.4.0.9. It pops up an error for the person trying to UVNC in and says unable to start VNC service on "insertmachinenamehere"

Can someone tell me if these switches have been deprecated in the new versions or something, i've looked around a lot but not finding much information about it.

%~dp0UltraVNC_1_3_60_X64_Setup.exe /silent /loadinf=%~dp0config.ini
net stop uvnc_service
sc config uvnc_service start=demand
rd "C:\ProgramData\Microsoft\Windows\Start Menu\Programs\UltraVNC" /S /Q
copy %~dp0ultravnc.ini "C:\Program Files\uvnc bvba\UltraVNC\" /Y
exit

I have tracked it down to something with the service on mine. It doesn't appear like it installs the service, almost like the service name changed possibly or something so the config isn't doing it properly?

[Rudi De Vos]

i'm on it, someone already tracked it on git, some error in the code.
Ignore was something else

[Rudi De Vos]

You start the inno setup wiith a config file
config.ini
What's in this file ?

You should run once to create or verify if all options still exist.
UltraVNC_1_4_09_X86_Setup.exe /SAVEINF="Unattended.txt"
This actual record what you do and create a file that can be used as
UltraVNC_1_4_09_X86_Setup.exe/silent /loadinf="Unattended.txt"

Code: Select all

[Setup]
Lang=en
Dir=C:\Program Files\uvnc bvba\UltraVNC
Group=UltraVNC
NoIcons=0
SetupType=custom
Components=ultravnc_server
Tasks=

Tasks=startservice if you want to start the service after install

I also propose to stop the service before installing, if the service is in use the installer can't remoce the old version
Stop service

Code: Select all

net stop uvnc_service 

install /updateuvnc

Code: Select all

UltraVNC_1_4_09_X86_Setup.exe/silent /loadinf="Unattended.txt"  

Set service to not auto start on boot

Code: Select all

sc config uvnc_service start=demand

[delete folder]

Code: Select all

rd "C:\ProgramData\Microsoft\Windows\Start Menu\Programs\UltraVNC" /S /Q

[overwrite ini]

Code: Select all

copy %~dp0ultravnc.ini "C:\Program Files\uvnc bvba\UltraVNC\" /Y

[Rudi De Vos]

MSOiD, now checking your issue

QueryAccept=2
QueryIfNoLogon=0

it auto accept the connection, but it should auto reject when user is logged in and accept when user is logged out.
In 1.3.8.1 it works fine, tested on 2 Windows 10 22h2 notebooks.

[VNCHELP890]

You really need to change the version numbers when you make these incremental changes (like the one showing the wrong version as an example).
Thanks.

[Rudi De Vos]

MSOiD
QueryAccept=2
QueryIfNoLogon=0

found and fixed in 1.4.0.10

[MSOiD]

Thanks, I will check it out and report back, where can I download new version?

[bwagoner17]

You start the inno setup wiith a config file
config.ini
What's in this file ?

You should run once to create or verify if all options still exist.
UltraVNC_1_4_09_X86_Setup.exe /SAVEINF="Unattended.txt"
This actual record what you do and create a file that can be used as
UltraVNC_1_4_09_X86_Setup.exe/silent /loadinf="Unattended.txt"

Code: Select all

[Setup]
Lang=en
Dir=C:\Program Files\uvnc bvba\UltraVNC
Group=UltraVNC
NoIcons=0
SetupType=custom
Components=ultravnc_server
Tasks=

Tasks=startservice if you want to start the service after install

I also propose to stop the service before installing, if the service is in use the installer can't remoce the old version
Stop service

Code: Select all

net stop uvnc_service 

install /updateuvnc

Code: Select all

UltraVNC_1_4_09_X86_Setup.exe/silent /loadinf="Unattended.txt"  

Set service to not auto start on boot

Code: Select all

sc config uvnc_service start=demand

[delete folder]

Code: Select all

rd "C:\ProgramData\Microsoft\Windows\Start Menu\Programs\UltraVNC" /S /Q

[overwrite ini]

Code: Select all

copy %~dp0ultravnc.ini "C:\Program Files\uvnc bvba\UltraVNC\" /Y

Thank you, i will give that a shot!

[Rudi De Vos]

1.4.0.10 TEST

-security fix
-QueryIfNoLogon fix
-mslogon v1 fixes


https://uvnc.eu/download/1400/UltraVnc_14010.zip
https://uvnc.eu/download/1400/UltraVNC_ ... _Setup.exe
https://uvnc.eu/download/1400/UltraVNC_ ... _Setup.exe

[lwc]

UltraVNC 1.4.0.9 (release)

Changelog:
- SC 2.0 load ini changes

Not sure but this means, but I've beta tested SC and found out:

1. Non English characters appear as Gibberish in the bottom right popup - this is even when Windows is set to this language for non Unicode programs:
   
2. In 3 attempts, in 1 of them the mouse kept moving away from me! I hope it was a one time thing, but it never happened in pre v1.4 SC versions.
3. I can no longer automatically access UAC screens even if I add [DIS_UAC] to helpdesk.txt (which didn't include it in the sample you provided):
   
4. I can't test the new auto ID repeater mode since repeater01/02/03.ultravnc.info don't seem to work anymore...are there new public repeaters which I can use?

[Rudi De Vos]

repeater is running on support2.uvnc.com

SC2.0 is now the same as winvnc.exe

running viewer is listen mode and connecting the server to the viewer with new connection is the same as SC.
SC is a graphical shell around the commandlines, all compressed in a self extracting exe.

Unicode: in SC 1.0 some changes ware made, let see if i can do the same for SC 2
DIS_UAC still need to be added

Mouse issue, winvnc should also have the same issue.

[lwc]

repeater is running on support2.uvnc.com

Just 1 instead of 3? In any case it doesn't do anything when the end user in SC clicks it - and by it I mean:

Code: Select all

[HOST]
Test 1
-secureplugin -autoreconnect ID:[ENTERCODE] support2.uvnc.com

[HOST]
Test 2
-secureplugin -autoreconnect ID:[ENTERCODE] support2.uvnc.com:5500

[HOST]
Test 3
-secureplugin -autoreconnect ID:[ENTERCODE] support2.uvnc.com:5900

[HOST]
Test 4
-secureplugin -autoreconnect ID:[ENTERCODE] support2.uvnc.com:5901

[HOST]
Test 5
-autoreconnect ID:[ENTERCODE] support2.uvnc.com:5500

[HOST]
Test 6
-autoreconnect ID:[ENTERCODE] support2.uvnc.com:5900

[HOST]
Test 7
-autoreconnect ID:[ENTERCODE] support2.uvnc.com:5901

[ENTERCODE]
4321

While the support agent uses:

Code: Select all

vncviewer.exe -dsmplugin SecureVNCPlugin64.dsm -proxy support2.uvnc.com:5901 ID:4321

Unicode: in SC 1.0 some changes ware made, let see if i can do the same for SC 2

Please do, thanks! Otherwise it's just Gibberish.

DIS_UAC still need to be added

But as mentioned, it does nothing even if I add it. Why doesn't it fix the UAC issues like it did in SC v1?

[Rudi De Vos]

Unicode: in SC 1.0 some changes ware made, let see if i can do the same for SC 2
Please do, thanks! Otherwise it's just Gibberish.
DIS_UAC still need to be added
But as mentioned, it does nothing even if I add it. Why doesn't it fix the UAC issues like it did in SC v1?

found and fixed

Next is the repeater, sorry only have a few hours a day...take a tittle time to recheck

[lwc]

Thanks!

But as mentioned, it does nothing even if I add it. Why doesn't it fix the UAC issues like it did in SC v1?

found and fixed

So in the next version if I add [DIS_UAC] to helpdesk.ini then it will be like in v1, and if I don't add [DIS_UAC] will it be like now?

BTW, why did you change scprompt.exe to helpdesk.exe? It makes it harder to know it's about SC.

[Rudi De Vos]

-autoreconnect ID:[ENTERCODE] support2.uvnc.com:5500
have to be
-autoreconnect ID:[ENTERCODE] -repeater support2.uvnc.com:5500

[Rudi De Vos]

unicode stuff + dis_uac

SC20 based on 1.4.0.10
https://uvnc.eu/download/1400/winvnc_SC20_14010.zip