UltraVNC

If server settings FieTransferTimeout=1 and viewer settings timeout is 30, i think it should be overwritten server setting FileTransferTimeout=30 in session.

Currently the server does not re-register FileTransferTimeout parameter.

Thanks.

Hi: On the server side, I changed FileTransferTimeout to 40 and it seems to be fine. I could send the file from viewer to server without cuts or errors. I think that if on the viewer side I put FileTransferTimeout to 40 before making the connection, the server should set its FileTransferTimeout to ...

Hello again: I have done a test with a notebook from the same ADSL (a 2,5 Mbps) connection for the viewer that generated the failure, An i5 3317U 1.7 GHz, Windows 7 Pro 64 bits 12 Gb RAM. I have installed the repeater and viewer of version 1.2.3.0 64 bits and SecureVNCplugin64.dsm. Sending file from ...

Change the timeout from 30 to 300.

Since I press "send" in file transfer (from viewer to server), in 8 seconds I get the error "Filetransfer interupted: reason connection with server broken".

What else can I test?

Thanks again.

It is important to emphasize that when I send files from the server to the viewer it works fine.

The problem is only when I send files from the viewer to the server.

My ADSL is 2,5 Mbps line.

Thanks.

Hi: The test conditions do not match the ones I use. I am using viewer and repeater on the same machine. I connect the viewer to repeater as localhost:5901 File Transfer fails and in addition the progress bar does not work properly, just start it goes to 66% and indicates that the transfer is ...

Copy a 12 Mb file from server to viewer sith encryption.
Destination is writeable. The temporary file exists and connecting again continues the copy where i left it.

Thanks.

Hi Rudi:

Server repeater and viewer with 1.2.3.0 version installed.
SecureVNC Plugin v 2.4.1.0

The problem is the same.


Do we change this thread to version-specific help 1.2.3.0? Can you do it?

Thanks.

Hi: I have problems with the file transfer option. UVnc versión 1.2.2.4 on server and viewer using SecureVNCPlugin.dsm Ver.2.4.0.0 Server on Windows 10 Pro 32 bits Viewer with repeater on Windows 10 Pro 64 bits I try to send a 12 Mb file from viewer to server. When it starts, the scroll bar goes to ...

I noticed this anomaly: with the new one if winvnc is connected to the repeater the file when I open file transfer an error message appears. "Filetransfer interupted: reason connection with server broken " if I use winvnc on a network without a repeater it works normally. if I don't use the ...

hello:


in my tests it also works well now. I need 32 bits version. where i can download it or when we will have the next version?

Many thanks.

In order to use uvnc as a remote desktop, it would be great to be able to start programs on the server and redirect the output to the printer to a local printer

What do you think?

Thanks.

I am testing the latest version but it has not failed yet...

I think the problem described by stefanorossetti is very similar to mine, if not the same. The problem is ramdom and it occurs in various operating systems, using uvnc as a service. Yesterday I installed the new executable and it has not failed until this afternoon. Now the log file does not stop ...

WinVNC.log copied at 12:00 am. Last entry in log file at 05:55 Using last winvnc.exe for extra debug info. Repeater is off. Thu Nov 22 05:55:08 2018 vncserver.cpp : authhosts set to "" vncproperties.cpp : ***** DBG - Load User Preferences vncproperties.cpp : clearing user settings c:\users\rudi ...

Today log: Mon Nov 19 05:53:22 2018 vncserver.cpp : authhosts set to "" vncproperties.cpp : ***** DBG - Load User Preferences vncproperties.cpp : clearing user settings c:\users\rudi\desktop\ultravnc\winvnc\winvnc\vncpasswd.h : PASSWD : FromClear called vsocket.cpp : VSocket() m_pDSMPlugin = NULL ...

First of all, thank you for your attention. It seems as if the service is blocked. I activated the log with DebugLevel = 12. I started the server at 19:18 and the repeater at 20:25. The service is active and running. Here copy the log: Thu Nov 15 19:18:43 2018 vncserver.cpp : authhosts set to ...

Hello: The server start up at 05:40 The repeater start up at 12:40 and did not receive a signal from the server. At 13:37 stop and start service on server manually and the repeater received signal. This is WinVNC.log file: Wed Nov 14 05:40:48 2018 vncserver.cpp : authhosts set to "" vncproperties ...

Hi: Keepalive is on now, but nothing changes. I think I intuit where the problem may come from. There are 2 remote PCs (A and B) that are turned on 24x7 and another 3 (C,D and E) that turned off every day. The repeater is not active 24x7 but it turns on when I want to connect remotely to the servers ...

Versions: UltraVNC Repeater 2016 build 1400 UltraVNC Server 1.2.2.1 Build: Jun 14 2018 22:01:12 UltraVNC.ini ------------------------------------ [ultravnc] passwd= passwd2= [admin] service_commandline=-autoreconnect ID:0001 -connect nnn.nnn.nnn.nnn:5500 DSMPluginConfig=SecureVNC;0;0x00104001 ...

Hi all !! Sorry for my bad english. I hope you understand me. Thanks in advance. I have a problem with the use of the repeater from some machines at some moments. The servers connect directly to the repeater by adding to the file ultravnc.ini in the admin section the line: service_commandline ...