UltraVNC

Does a 64bit UVNC viewer work with a remote 32bit UVNC server an vice versa?

Does a 32bit UNVC server/viewer work (successfully) on a 64bit WinOS (e.g. Win7)?

Thomas

When I go to web page

http://www.uvnc.com/downloads/single-cl ... loads.html

then I cannot find a download button. there are only upload buttons.

So where can I download SC executables?

Thomas

Is UltraVNS portable?
In other words is it runnable from USB stick ?

Thomas

Approx 2 years ago I evaluated UltraVNC and found it necessary to adjust the firewall rules resp. setup a NAT port forwarding to enable a connection. This is not comfortable for most users. So I switched over to TeamViewer where this is not necessary due to a "broker server" in the middle. Now I ...

Just a few days ago I found a tool "TeamViewer" available for free from http://www.teamviewer.com It is based on VNC and is supported by a lot of major companies. It has all the features of UltraVNC and (for my very important) it can handle NAT port forwarding WITHOUT the need to configure routers ...

As I had to notice the viewer should always be started BEFORE the server. This is absolutely inconvenient and unrealistic. Think of two scenarios: 1.) I want to access from my university/office my home computer. I cannot start the viewer then run within 10 seconds home and start the server. 2 ...

PcHW offers in one of its sub directories special drivers for speed up.

How much will be the speed increase (.e.g in percent) when I use these drivers ?

Is it notable or neglectable ?

Is it important who is running at first: The server or the viewer ? Is it important for both scenarios: Direct connection AND with repeater ? In other words if the viewer is NOT running and the server starts he obviously does not find the viewer. Does the server remain active and poll e.g. every 10 ...

The usage of the term "server" is very confusing in PcHelpWare's world. In contrast to the remaining computer world teh server does NOT "serve" as a server but initiates the connection. Whereever else a client-server architecture is working the client is requesting services from the server !! Think ...

First of all let me say thank you to all developers of PcHelpWare. I appreciate very much having such a tool like PcHelpWare. However using PcHelpWare is (by far) not my core job. I want to use it with a minimum of learning and investigation effort. Moreover I can only recommend this tools to others ...

If you refer to the Sticky "Step by Step for Pchelpware release 1.0":

Some topics are much to detailed (e.g. How to download the files)
others do not cover key step.

Why is the manual on page http://www.uvnc.com/pchelpware/config/index.html spread on 4 single pages? I would appreciate to have them one one page so that I can print them into one pdf doc. Furthermore on the this "Manual" pages there are no GoogleAds on the left. So why is there such a big white ...

I would appreciate if there is a html web page which shows if the NAT2NAT service is currently down or up.

Please, could you set up such a page?

Why not integrating all the NAT2NAT stuff into WinVNC.exe and Vncviewer?

That would be perfect: Only one program for all purposes.

Ok, I can access my home PC from almost everywhere: friends, WLAN cafes, internet shop. But I cannot access it from my banks office. After some investigations I found the reason: The bank has an inhouse proxy. All internet web page traffic is passed through proxies. When I call e.g. www.google.com ...

Assume I have 2 computers inside one and the same LAN. Ok, in this case I could connect them WITHOUT the help of NAT2NAT tools. It works fine. However I would like to test the NAT2NAT service + tools from these two computers. So is it possible ? In other words is it possible to establish a NAT2NAT ...

Do I have to start winvnc.exe BEFORE I start NSC.exe ?

Or can I wait until NSC.exe and NVC.exe found each other (=green light indicator) and THEN start winvnc.exe ?

When I use the two updated programms natconnect_server.exe and natconnect_viewer.exe from http://sc.uvnc.com/V2/connectors.zip there are no yellow and green lights for indicating NH server status as for the old NSC.exe and MVC.exe. How do I recognize that client and server found each other? The only ...

Which ports do I have to open in the firewall for NSC.exe and NVC.exe ?

I tried to setup a NAT2NAT communication. For that I started at first (on the VNC server) winvnc.exe Then I started NSC.exe and doubleclicked on it. A message window pops up which asks for a Username and Password. Hmm, which user+password should I enter? I tried the only one that makes sense: The ...

My winvnc.exe is running behind a router and listening to ports 5800 and 5900. I have access to the router configuration. Do I have to setup exactely these two ports for forwarding or are the neighbor ports used as well? I am not sure but I remember a situation/software where neighbor ports are ...

I want to establish a connection with NAT2NAT.

Do I have to register the user which I have to enter in NSC.exe and NVC.exe somewhere (outside my computer) before?

Or is it completely up to me which user+password I enter as long as
the client(viewer) knows this username + password?

Sorry for this newbie question.

If I want to use a Nat2Nat communication:
Must winvnc.exe run too or is it sufficient if NSC.exe runs?

In other words: does NSC.exe contain the function of winvnc.exe or
alternatively does it start winvnc.exe automatically when connection is established?

Ok, when I use the vncviewer (resp. tabbed viewer) with the MSRC4Plugin_NoReg Plugin everything works fine. But when I try to access the server through the (IntExplorer) Browser I am not successful. Obviously the browser tries to access unencrypted the encryted data stream from the VNC Server. Is ...

When I go to menu Session Options->Options of (tabbed) viewer I can see an entry "Disable clipboard transfer" That shows that Clipboard transfer from Server system to viewer system must be possible somehow. However I tried a couple of things to do a test clipboard transfer but without success. So ...

When I start the tabbed viewer v129 and select a DSM-Plugin
and check it then everything works.

BUT the check left of the DSM Selection is not saved at session end.

When I exit the tabbed Viewer and restart it
then the Use DSMPlugin check is NOT set

Thomas

Hello, when I look onto the sourceforge download list page I can see a lot of files. But I am a bit confused about the release sequence and compatibility of them. Starting with the section REL 1.0.1 I can find there also UltraVnc-Repeater-104.zip and UltraVnc-Viewer-101.zip Ok thats fine for the ...

How is there relationship between the AESplugin and AESplugin V2? Is AESplugin V2 the successor of AESplug? If yes, why starts the version/release numbering on page http://msrc4plugin.home.comcast.net/beta.html for AESplugin V2 again with "001" and why not with "005"? Why not naming V2 with 02.001 ...

Sorry for this simple question: but from where do I get the sc software? Sc.exe is not inside the UltraVNC package. If I click on the link mentioned on the top right of page http://sc.uvnc.com/index.php?section=12 I get the "normal" UltraVNC package Is only the source code available? I need the ...

As well known UltraVNC can be started as a service (under Win2K/WinXP) or manually by clicking on Winvnc.exe. Are the settings adjusted through the winvnc.exe window the same for both the service and the stand-alone UltraVNC? If not: How do I e.g. setup another password for the service and the ...