UltraVNC

Okay, I restarted the computer, started the Repeater and tested again and everything is working perfect!

Okay, I moved the chunkvnc over to the Repeater computer and installed it there. Ran the compile. I started the repeater file, changed the ports and restarted the repeater. Ran the instant support file and it came up with the number and this time asked for the password (not doing that before ...

Need some help. I am moving the repeater to another computer and running into problems; Here is what I did: downloaded the chunkvnc file and installed on the computer this is also the viewer. Copied the latest winvnc.exe file and placed it in the instantsupport_files folder Entered the Compile info ...

I've been using CHUNKvnc for several years now and maybe this tip will help someone else. Install a free Logmein account on the repeater computer, install sysinternals tcpview and run. Plus, you might put a shortcut to the repeater log file. Now, after connecting if you think you will be working off ...

Compiling issue if changing the Viewer Port: I ran a compile (CHUNKVIEWER setup version 331) after entering PORT 9177 for the viewer port. After compiling the Viewer compiled :surprise: with wanaddressn:9177 but the InstantSupport & Repeater compiled with default! (Port 5901). Is there a way to fix ...

Makes sense. What files do I copy to a USB so the viewer is portable?

Hi, I remember when I used the viewer on a USB on a previous version I copied the encryption key file to the viewer/bin file. On the latest build I see 3 files in the bin folder: chunkviewer.ini, SecureVNCPlugin.dsm and vncviewer.exe When I run the chunkviewer.exe I see (no encryption) and I cannot ...

Hi,

I'm likely missing something obvious since I only see the compiler.exe and do not see a separate one for the repeater?

Hi, What file do I edit to change the repeater ports? I put the port numbers I would like to use in after running the compiler.exe but it looks like that only changes the instantsupport settings? The computer is running c++ 2008, not 2005, is that okay? When I run the compile I see two pop ups do ...

Has anyone else seen this one? I was at the customer's computer and downloaded the support.exe file to their computer. Norton grabbed the file :yell:, scanned it and tucked it away and reported it had, "Norton Insight Network Threat." I was in a hurry to figure out where it stashed the file. Any ...

Ok, now everything makes sense, you should never run InstantSupport this way. InstantSupport runs everything from the temp folder and doesn't require admin rights to function. Choosing the install service option will elevate a separate executable to install everything. Elevating InstantSupport.exe ...

Hi, Here is where I think the process failed for me. The remote user needs to "Right-Click" and run the instantsupport.exe file "run as administrator" to give it the privileges to install the service. This came to mind when you mentioned about using an account with Administrative Privileges! BTW ...

I left it trying to connect and got this message eventually: "Connection failed - Error reading Protocol Version Possible causes: - You've forgotten to select a DSMPlugin and the Server uses a DSMPlugin - The selected DSMPlugin is not compatible with the one running on the Server - The password you ...

Additional info, I had the person restart the instantsupport.exe and I could connect. However, if I try to install as service it will not connect and I get the "Negotiate Protocol Version" and no connection takes place. And, when the UAC triggered, no more connection! So here I am staring at the ...

Hi, Trying to connect to a client machine and in the "VNC Viewer Status for ID" I get the message "Negotiate Protocol Version" and it stays stuck there, goes no further and 0 Bytes Sent, 0 Bytes received. This is the first time connecting to another computer with it installed as a service. Could not ...

(supercoe of Chunkvnc recommended I post this question here.) I performed a file transfer yesterday of a 1 Gig 7z compressed file and it took about 1 hour. I use Bitmeter to monitor my bandwidth and the transfer rate would spike to around 250 Kb/s for about 1 sec and drop right back to 0 Kb/s for 2 ...

Hi, I could not locate this question so I apologize if I missed it. If I need to connect with several remote computers (not simultaneously) and after working on one I move to the next computer and by the time I connect the computer has entered screen saver mode and requires a logon (and I know the ...

Hi, If you have a chance to update the install instructions this information of setting a fixed IP for the repeater computer in the router would be useful. This will definitely help my new business keep growing so I'll be glad to donate a beer in the very near future. I appreciate the work you and ...

Hi, I performed a file transfer yesterday of a 1 Gig 7z compressed file and it took about 1 hour. I use Bitmeter to monitor my bandwidth and the transfer rate would spike to around 250 Kb/s for about 1 sec and drop right back to 0 Kb/s for 2-3 sec and keep repeating this process. Any ideas? I'm ...

Thanks for the reply. Since I need the ChunkVNC repeater to run with the computer on I took the easy short term solution and downloaded the NO-IP update client as you suggested. Just in case someone is looking for this it is found at https://www.no-ip.com/downloads.php?page=win

Hi, I used the very helpful installation instructions and it went really well. The particular issues I had were having the Router assign the same internal IP to the computer running the repeater software. I wanted the repeater to run automatically upon startup so being an XP machine I placed the ...

5. make sure to install a module from no-ip that keeps no-ip informed if your repeater box does not have a static ip address (I'm assuming that's your situation?) I don't do this since I use a router that will handle that for me (the router allows you to indicate that you want to update the no-ip ...

Thank you for the quick response. It sounds like maybe I should have 2 compiled versions as follows: Instant Support Version: The current one I created and choose the install Service for remote connection to VISTA & W7 machines. At the end I would uninstall the service manually? For a Server install ...

Hi, Thank you for this great service. I was able to follow the Chunkviewer install directions. The repeater is installed, ports forwarded, and the no-ip servce was used since I have a dynamic IP address from the ISP. The connection from one computer to the other was successful. Now I'm at a loss for ...