UltraVNC

Just curious if supercoe has any intention for a refresh in the near future? New UVNC version, lots of interesting things posted to this forum, and supercoe's own comments about wanting to do a refresh make me want to check in. Thanks to the open nature of the project I've got a pile of my own ...

supercoe, I feel you, bro. It's a struggle to even get ChunkVNC running for some of the people I have to support. One of the reasons I love ChunkVNC so much is it's just my logo and a giant number presented to the client, and I still have occasions where "go to my website, click the link, run the ...

supercoe - is there something in place to enable install as service when it's launched? I didn't see anything in config last time I built my EXE. Come to think of it, it would be nice to have a prompt "Do you want to install as a service?" when it's launched so it can be skipped on XP machines, and ...

How much luck are you having with leaving ChunkVNC installed as a service for unattended access? I haven't been doing so because of stability issues I've heard reported and experienced myself. I haven't tried it in a while, but I was fairly often not able to connect when I wanted to.

Like Supercoe says, -install sets it up as a service. I ran it as a service on my old Server 2003 box for years but started having trouble with it staying stable a while back. I figured it was just the flaky nature of the box it was running on so, now that I'm finally migrating all my services over ...

I'm not sure where to post this, there's no sub-forum for the Repeater, but I figured that since Chunk uses it and this section is pretty active, I'd post this here. I'm installing the Repeater on a Server 2008 R2 box for the first time and, although the service automatically starts when it boots up ...

Updates: I just went through, same test systems as previously, and did some testing. Replacing winvnc.exe in ...SRC\InstantSupport_Files, I recompiled Chunk 3.2 with: A) As is, with "chunked" UVNC Server 1094 B) with standard UVNC Server 1095 C) with standard UVNC Server 1096 D) with customized UVNC ...

Ewwww, snow.
My California blood's too thin for snow sports.

Beat up on multi-monitor some, updated [topic=27016]THIS THREAD[/topic]

I don't see much posted recently so I was just curious how goes the next version of Chunk? I'm currently compiling Chunk 3.2 with WinVNC.exe from 1.0.9.6 just to see what happens and I was curious what progress has been made for Safe Mode via Chunk. As always, very large amounts of thanks to ...

Thanks Supercoe. As always, beer money I've thrown your way is money well spent. Paid support isn't usually this responsive!

If I get a chance to dig around and do further testing I'll post.

Found the previous thread: [topic=16752]HERE[/topic] With the previous Chunk version, replacing winvnc.exe in the Chunk compiler with the patched executable resolved the problem. I haven't tried recompiling with that older EXE yet, mostly because I don't want to revert that far back. If I get a few ...

That at least gives me the primary screen without having to toggle the "Select Full Desktop..." button, but I still have the same issue when I enable viewing of multiple displays. I've tested on two other multi monitor servers and get the same thing. My understanding of the previous problem was that ...

Weird. I just went back to the basic Chunk3.2 package and recompiled without any changes and I'm getting the same thing - both with the "Chunkized" exe and the main UVNC exe. Of course, all of this is being tested against a "worst case" scenario of a server with 3 displays running at 1280x1024 ...

I've been out of the loop for a while and have skipped from Chunk 3.1 and UVNC 1.0.8 to current versions. With the previous version of Chunk (and UVNC,) I used a customized winvnc.exe that Rudi had put together to resolve multi monitor problems where the cursor is displayed to the client on a ...

Wow. I had a hell of a time finding it again. It may not be a different version after all - I hadn't done anything with it yet, but I downloaded from http://www.uvnc.com:8080/downloads/repeater/83-repeater-downloads.html here and it downloads as "Repeater2010.zip" I just opened it real quick and the ...

Oops. Re-searched and read a couple more posts and appears it was a Server issue... I suppose I posted a little too soon. Further investigation looks like 108 is included with the Chunk3.2 files. Well, the question still stands I suppose - What repeater is recommended? I have to assume it's ...

I've been out of the loop for quite a while so I've spent several hours reading posts over the past day or so. I may have missed a reference somewhere to the current recommended Repeater, if so I apologize but could someone enlighten me? From what I can see the 1.082 repeater was problematic (as I ...

I've been caught up for a while and missed the 3.2 final release until now so I've been going over the posts in the announcement thread. Just wanted to verify that the only difference between UVNC 1094 and UVNC 1095 was the SCHook issue and that it doesn't effect Chunk. That's what I've gotten from ...

Damnit Rat, I just lost an hour when I should have been doing other things.

QUIT GIVING ME COOL STUFF TO PLAY WITH!!

Wait, never mind, I retract that.

Very cool stuff in the works!

Not sure where else to put this so I'm taking a shot and sticking it here. I'm getting more and more multi-monitor clients and I've had intermittent issues with not being able to click on stuff. Appears to be a <0 check or something as Rudi describes over here [post=69780][/post] I'd really like to ...

The above posted fix resolved my problem on a Vista Ultimate x64 system w/ 3 x 1280x1024 displays, and also resolved problems with a Win7 Pro running 2 displays (not sure exact resolution)
It looks like it's the positioning causing it as Rudi said above.

The above posted fix resolved my problem on a Vista Ultimate x64 system w/ 3 x 1280x1024 displays, and also resolved problems with a Win7 Pro running 2 displays (not sure exact resolution)

:D ....I'm so happy B That particular thread shows that you've been having some serious problems and I've always had great results with UVNC, maybe you're just jinxed. I've been using it (in corporate environments as well) since version 1-RC4 without seeing as many problems as you are (BTW, Rudi ...

YOU"RE KILLING ME SUPERCOE!!!! I WANT 4.0!!

Uh, ... Please?

@ supercoe - OK, I've been digging around here looking at some of the stuff intended/talked about for v4 and I'm impatient now. Just how much beer is it going to take to tear you away from Bad Company 2? I've been scrounging for stuff to ebay to get funds for the new Scala Rider G4 from Cardo, but ...

SC - glad to hear you're busy. I'm trying to get things lined up in my own business so I can hire a tech and actually be able to manage them. I guess if you're providing quality service it overrides "the economy" everyone seems to be bitching about.

I've been loving ChunkVNC lately but haven't been following the forum because of time considerations. Finally got over here to get caught up and it looks like there's lots of cool stuff in the pipeline. Tons of thanks to supercoe and it looks like there's some props to be sent out to rat and a ...

As always, SUPERcoe to the rescue. Thanks

LOTS of activity over here, looks like Chunk is popular. Still looking to get the Mac thing working (I'm not a mac guy so I don't have one, but hey a computer's a computer in my experience. Bought a iBook and played around enough to figure out where stuff is hidden and sold it, the rest is research ...

Just compiled the latest version, looks good so far. I haven't used the Mac version yet, but I can't follow the directions for it - there appears to be something wrong with the InstantSupport.app file. When I try to extract it I get "File not found" and if I extract the entire ZIP, the file doesn't ...