UltraVNC

[quote="redge"]ok, this good it work now even i don't really understand what happen. never mind.[/quote]

Yup!

Except that I love knowing _how_, so I can try it again next time....

Nick

None of them! <G> It looks as if it was the ISP, redge. All other things were the same as they were before on my system. Stuff suddenly started working. Others have had trouble with VPNs etc on the same ISP. Having said that I went to the PC I want to remotely control, and the system failed!. I ...

To all those who tried to help me. It works now. Everything in my system is as it was. I had Port redirection worked out right. I had ports open. It _is_ simple. I have firewalls running. I have the router in place. I have UVNC listening...and a Net-based check shows the port open. Others have ...

I give up.

I'll leave it there. Sorry

Nick

AH. There's the rub. (Actually I thought I had to do it on both machines) Having to set up port redirection etc on every machine I want to remote control is exactly what I _don't_ want! I want the other end to see the whole thing as simple as possible. Each of them may have a completely different ...

Phoooh!

Ok. I will will read what you have said, and digest.

It may take a bit; there is a lot there that goes against what I have already seen.

Nick

redge: Sorry. I missed a point. I cannot try another router this one is the only one that allows me to connect using the MODEM I have (no choice: Wireless BB) Here is my final setup (which does not work) ---Mode: (Single or range) I chose single ---Service Name Text) I entered "Service Name ...

redge: I did try the "connect to office computer", but I am stuck at a certain point. I reckon it's all blindingly simple, but something is giving me a blind spot. I can't tell if my ISP is blocking stuff, because I am not sure if I am even getting that far. Perhaps if I lay out my specific instance ...

You should be forwarding ports to the LAN IP the machine running the server not doing whaevre confusing stuiff you seem to be doing... To be honest I cant quite understand some of the action you taken though I undewrstand the problem. And as to all your other comments I have to say please ...

I am beginning to suspect that all the people viewing my posts are looking for help, not trying to help.

It's ridiculous.

I cannot be bothered. There are ways that let you actually connect.

Well.....31 other people also seem completely unaware of how to fix this.

Thanks folks

I have just tried a couple of the Echo Server systems that are around. They simplify things but seem very slow. I also tried running a VPN programme,and while I could connect, I could not work out how to use UVNC over it. So I come back to direct control with UVNC, I guess. I have read and tried to ...

>Sorry, but can it therefore be taken off the list of Addons? no, I'm not owner of uvnc.com website so no ability to remove useless addons. Thanks redge. You do so much work here, I thought you may have the attention of somebody's ear <G>. I'm not being smart. I appreciate all your input. Nick

no, NH stopped was experimental ! NAT Helper (NH) work only with 2 separate network client and server for both computers are with NAT router (nor strong firewall outgoing filter) testing 2 computers client and server over same workgroup in house over NAT router fail. Sorry, but can it therefore be ...

The who...the what????..... OK. I need to change my sig lines. I am using V104 RC (the latest....16?). What could the router be doing? I have _all_ security switched off. I can't get the stupid icon to appear in the tack bar to see what its details are, but, I used ms port query BTW. I ran this test ...

I went to the grc site and did the shieldsup thing for all sort os ports.

I had my router's FW OFF. I had XP FW OFF. I had Comodo FW OFF.

in every case I was told that all my ports were STEALTH. No ports available.

It all sounds so easy.

What now?

Thanks

Nick

my apologies

guess not shrug

I want to view a remote PC over the internet I have XP home SP2 NAT router (Draytek Vigor 2910 VG) Wireless connection from my PC to router. Wireless broadband The remote machine is the same except for a different router and ADSL 2 B/B. Is there somewhere that takes me step by step through setting ...

Is there a website that people can use to set up UVNC? I am thinking of something that will allow VNCViewer to try to connect, and which would also test connections to WinVNC server. This stuff is not a simple setup in many cases. I am trying to use this for basically what it has been said to be ...

Do you have software firewall(s) running? You may have to tell that to let 5900 through.

I found that at some stage Win Firewall had restarted itself. I use another FW, so that tricked me for a while.

Try this:

Control Panel -> Internet Options -> Connections (tab). Choose Never Dial a Connection.

HTH

Nick

While installing, I had the following pop up via Comodo's BOClean. Location of startup: FILE C:\DOCUME~1\NICK~1.PSY\LOCALS~1\TEMP\IS-NVAB9.TMP\WINVNC.EXE This trojan horse program was found on your machine. It has been shut down, but the FILE from which it started still remains and can be started up ...

Thank you. That was what I was after..

Nick

Is there a list of cmd line cmds for UVNC?

Thank you

Nick

[quote="mattice06082"]Was the firewall off and you turned it on? If so you would need to have created an exception for TCP port 5900 traffic or you would lock yourself out.[/quote] Sorry. To address your question. No. I made no attemptem or successful alterations to the Windows FW, and no others ...

[quote="mattice06082"]Was the firewall off and you turned it on? If so you would need to have created an exception for TCP port 5900 traffic or you would lock yourself out.[/quote] I am not sure that I uderstand. Everything works until I try to make changes that involve DBoxes. I would need to try ...

So of the 50 views, I am the only one seeing this?

I tried to make my signature my setup, but I do not see3 any sig. SO just in case:

Win XP SP2 Home as Client
Vista Home Basic as Server
V1.03 RC 6

Nick

When I tried to operate the Server machine's Start function (Start/Control Panel etc) I found that I was in View Only mode, effectively. I wanted to make a Win Firewall Setting but when I opened Control Panel, and asked for Set Up Windows Firewall, as soon as the DBoxes popped up I was unable to in ...